Manual Candy FCO 404X (page 22 of 24) (English)

466032

Zoom out

Zoom in

1/24

Scrubbing with steel cleaning wires may harm the vitroceramic glass surface. Formations

of du st

on the surface should be cleaned up using a dampened cloth.

Changes in colour which might occur on the ceramic glass surface do not affect the functional

structure

or permanence of the vitroceramic. The reason for the changes in colour is not the change

in th e

material; it may be because the burnt residues on the surface are not cleaned up or the pots used

have worn the glass surface or because unsui table cleanin g ma terials were used.

The cleaning spatula should always be used priortochemical cleaning substances. With this

spatul a,

you can clean up the tiniest of dirts on the vitroceramic surface. Dirt s that are difficult to remove,

such

as melted plastic, heavy oils, sweet substances, can be removed easily with the spatula. As the

spatula includes a razo r, it is dangerous and must be kept out of reach of child ren

During cleaning with the spatula, pay attention not to scrape off the sillicon adhesives found on the sides

of the glass.

It is recommended that you leave this operationtothe Authorised Service.

Unplug the oven first and make sure that it is cold. After removing the lidinfront of the light, take the

bulb o ut. Insert the n ew bulb r esistant to 30 0

C, which you find atAuthorised Services, into the

place of the bulb you have removed. Then fit the light protecting back into its place. After that,

your

oven will be re ady fo r use.

ENG

5.5 MAINTENANCE

Replacing the Oven Light Bulb

lid

will

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Candy FCO 404X in the language / languages: English as an attachment in your email.

The manual is 2,15 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Candy FCO 404X Manual

Product: