511160

Candy EVOW 4653 D Manual

38
Zoom out
Zoom in
Previous page
1/53
Next page
74 75
IT
●
Si assicuri che il rubinetto
dell’acqua sia aperto.
●
Che lo scarico sia in
posizione regolare.
SELEZIONE PROGRAMMA
Fate riferimento alla tabella dei
programmi o alla legenda dei
programmi sulla macchina, per
scegliere il programma più
adatto.
Il programma viene scelto
ruotando la manopola
programmi e facendo
coincidere il numero del
programma con l’indice.
Sul display verranno visualizzati i
parametri del programma
scelto.
Eventualmente modificare la
temperatura di lavaggio.
Premere i tasti opzione (se
desiderati)
Premete il tasto AVVIO/PAUSA.
Il programma ha inizio.
Il ciclo di lavaggio avverrà con
la manopola programmi ferma
sul programma selezionato sino
alla fine del lavaggio.
Attenzione: Se dovesse
mancare la corrente durante il
funzionamento della
lavabiancheria, una speciale
memoria conserverà
l’impostazione effettuata e, al
ritorno della corrente, la
macchina ripartirà dal punto in
cui si era fermata.
●
Alla fine del programma sul
display viene visualizzata la
scritta “End”
●
Attendete lo spegnimento
della spia oblò bloccato (2
minuti dalla fine del
programma).
●
Spegnere la lavabiancheria
portando la manopola
programma in posizione OFF.
●
Apra l’oblò e tolga i tessuti.
●
Chiuda il rubinetto dell’
acqua.
PER QUALSIASI TIPO DI
LAVAGGIO CONSULTI
SEMPRE LA TABELLA DEI
PROGRAMMI E SEGUA
LA SEQUENZA DELLE
OPERAZIONI COME
INDICATO.
EN
● Ensure that the water inlet
tap is turned on.
● And that the discharge
tube is in place.
PROGRAMME SELECTION
Refer to the programme guide
to select the most suitable
programme.
Turning the selector knob
required programme is
activate.
The display will show the
settings for the programme
selected.
Adjust the wash temperature if
necessary.
Press the option buttons (if
required)
Then press the START button.
When the START button is
pressed the machine sets the
working sequence in motion.
The programme carries out
with the programme selector
stationary on the selected
programme till cycle ends.
Warning: If there is any break
in the power supply while the
machine is operating, a
special memory stores the
selected programme
and,when the power is
restored, it continues where it
left off.
● When the programme has
ended the word “End” will
appear on the display
● Wait for the door lock to be
released (about 2 minutes
after the programme has
finished).
● Switch off the machine by
turning the programme
selector to the “OFF”position.
● Open the door and remove
the laundry.
● Turn off the water supply
after every use.
FOR ALL TYPES OF
WASH CONSULT THE
PROGRAMME TABLE
AND FOLLOW THE
OPERATIONS IN THE
ORDER INDICATED.
PT
●
Certifique-se de que a
torneira de alimentação de
água esteja aberta.
●
Certifique-se também de
que o tubo de descarga esteja
bem colocado.
SELECÇÃO DE PROGRAMA.
Utilize o guia de programas
para seleccionar o programa
mais adequado.Rode o
selector requerendo o
programa que está activado.
No visor são apresentadas as
regulações para o programa
seleccionado.
Ajuste a temperatura de
lavagem,se for necessário.
Prima os botões de selecção
de opções (se for necessário)
Depois pressione o botão de
“INÍCIO”.Quando o botão de
“INÍCIO”for pressionado, a
máquina apresentará a
sequência do programa.
O botão mantém-se intacto,
mesmo quando o programa
está a decorrer.
Aviso: Se houver quebra de
corrente eléctrica enquanto a
máquina estiver a funcionar,o
programa seleccionado fica
registado numa memória
especial e,quando a energia
eléctrica for restaurada o
programa continuará a partir
do sítio onde tinha ficado.
●
Quando o programa chega
ao fim, a indicação “End”(fim)
é apresentada no visor
●
Espere que a porta que está
fechada abra (cerca de 2
minutos, depois do programa
ter terminado).
●
Desligue a máquina,
rodando o selector para a
posição “OFF”.
●
Abra a porta e retire a
roupa.
●
Desligue a torneira de
fornecimento de água após
cada utilização.
A TABELA DE
PROGRAMAS CONTÉM
INFORMAÇÕES SOBRE
TODOS OS TIPOS DE
LAVAGEM. CONSULTE-A
PARA ESCOLHER O
PROGRAMA ADEQUADO
À ROUPA QUE VAI LAVAR,
E SIGA AS OPERAÇõES
PELA ORDEM AQUI
APRESENTADA.
DE
● überzeugen Sie sich, daß die
Wasserzufuhr geöffnet ist.
● daß der Ablaufschlauch
richtig angebracht ist.
PROGRAMM WÄHLEN
Die Programmtabelle oder die
Programmübersicht am Gerät
hilft Ihnen, das geeignete
Programm für Ihre Wäsche zu
finden.
Drehen Sie den
Programmwahlschalter auf das
gewünschte Programm, bis die
Programmnummer mit der
Anzeigemarke übereinstimmt
Das Display zeigt sodann die
Voreinstellungen des gewählten
Programms.
Bei Bedarf Waschtemperatur
verändern.
Optionstasten (sofern
gewünscht) drücken.
Drücken Sie die Taste
START/PAUSE.
Das Programm startet.
Während des Waschgangs
bleibt der
Programmwahlschalter bis zum
Ende des Programmes auf dem
gewählten Programm stehen.
ACHTUNG: Bei einem
eventuellen Stromausfall
während des Betriebs der
Waschmaschine werden die
gewählten Einstellungen in
einem speziellen Speicher
abgespeichert, so daß das
Gerät wieder dort anfängt zu
arbeiten, wo es aufgehört hatte,
wenn der Strom wieder da ist.
● Am Ende des Programms
erscheint im Display die Anzeige
“End”
● Warten Sie, bis die
Türverriegelungsanzeige
ausgeht (2 Minuten nach
Programmende).
● Schalten Sie die ab und
Waschmaschine stellen Sie den
Programmwahlschalter auf die
Position OFF
● Das Bullage öffnen und die
Wäsche entnehmen.
● Schließen Sie den
Wasserhahn.
BENUTZEN SIE FÜR JEDE
WÄSCHE DIE
PROGRAMMTABELLE UND
BEACHTEN SIE DIE O.A.
REIHENFOLGE.
FR
● Vérifier que le robinet d’eau
soit ouvert.
● Vérifier que la vidange soit
placée correctement.
SÉLECTION DU PROGRAMME
Sélectionnez le programme en
tournant le sélecteur de
programmes et en alignant le
nom du programme sur
l’indicateur.
L’écran affichera les réglages
du programme sélectionné.
Ajustez la température si
nécessaire
Pressez les boutons d’options si
besoin
Appuyez sur le bouton " START "
et quelques secondes plus
tard, le programme se lance.
Le cycle de lavage se réalisera
avec la manette des
programmes arrêtée sur le
programme sélectionné jusqu'à
la fin de celui-ci.
Attention: En cas de coupure
de courant pendant un
programme de lavage, une
mémoire spéciale restaure le
programme sélectionné et,
lorsque le courant est rétabli,
reprend le cycle là où il s’est
arrêté.
● A la fin du programme, le
mot “End” apparaitra sur
l’écran.
● Lorsque le programme est
terminé:
● Attendez que le verrou de
porte se désactive. Le voyant
lumineux "" Témoin de
verrouillage de porte " s’éteint
après environ 2 minutes;
● Mettez la machine à l’arrêt
en tournant le sélecteur de
programme à la position OFF.
● Ouvrez la porte.
● Enlevez le linge.
● Fermer le robinet d’eau.
POUR TOUS LES TYPES DE
LAVAGE CONSULTER
TOUJOURS LE TABLEAU
DES PROGRAMMES ET
SUIVRE LA SEQUENCE
DES OPERATIONS
INDIQUEE.
… 38 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Candy EVOW 4653 D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Candy EVOW 4653 D in the language / languages: English, German, French, Italian, Portuguese as an attachment in your email.

The manual is 4,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info