Useful advice for users
Tips on using your domestic appliance in the most environmentally-friendly and economical
way
Do a full load in your washing machine
To prevent any possible waste of energy, water or detergent we recommend that you put a
full load in your washing machine, not exceed the maximum loads shown below:
Cotton and linen 6 kg
Mixed 2 kg
Very delicate 1,5 kg
Wool 1 kg
Up to 50% energy saving can be made with one full load compared to two half load washes
When is prewashing really needed?
Only with particularly dirty loads!
Energy savings of 5 to 15% are made by not selecting the prewash option for normal soiled
laundry.
Which wash temperature should you choose?
Using stain removers before machine washing reduces the need to wash at temperatures
over 60°C.
Energy savings of up to 50% can be made by using a 60°C wash temperature rather than
90°C
6
Description of controls
On/off button
Press to start the appliance. At the end of the cycle press again to reset the button and
switch off the appliance.
Door lock
Door locked indicator light is illuminated when the door is fully closed
(only after that On/Off button is pressed).
At the end of the cycle, when the light will go out is possible switch off the appliance and
open the door.
Handle door
To open the door turn the handle in the manner illustrated in fig.
A special safety device prevents the porthole from being
opened immediately after the end of the cycle. Wait for 2 minutes
after the wash cycle has finished before opening the door.
C
G
B
Fig. 1
ACDE G
L
I
B
7