704532
14
Zoom out
Zoom in
Previous page
1/23
Next page
14
! To turn the appliance on and off, press
the ON/OFF button.
Language set
ting
! After connecting the machine to the
network and turning it on, turn the
"SMART RING" to display the available
languages.
! Select the desired language by turning
the "SMART RING" and confirm by
pressing "SET". From now on, you can
select and start programs.
Change the language
If you want to change the setting language
you w
ill have to hold the "SET" button
down for 5 seconds. The welcome
message will appear on the display, and by
turning the "SMART RING" you will be able
to choose a new language.
! After turning the appliance on, rotating
the "SMART RING" the icons for the
programmes will light up and the display
will show the description and the relevant
parameters.
! To start the selected cycle with the preset
parameters, press START/PAUSE.
! If the selected programme is to be
modified, press "SET" and rotate the
"SMART RING" next to the icon of the
selected option; then, press "SET" again.
! Rotating the "SMART RING" you can
display the available selections for the
set option. To confirm press "SET", then
press START/PAUSE to start the cycle or
repeat the operation for other options.
! Press to start the set cycle.
WARNING:
Do not touch the display while fitting the
plug, because during the initial seconds,
the machine performs a self-calibration
that might be interrupted: if this
occurs, the machine may not operate
properly. In this case, remove the plug
and repeat the operation.
ON/OFF button
At the end of the cycle, do not forget
to turn off the appliance by the
ON/OFF button, disconnect the plug
and close the water faucet.
First starting
Through this process all saved
settings will be cancelled.
SMART RING (ring for selecting
PROGRAMMES/OPTIONS)
When the appliance is turned on
again,
the last programme will be shown,
memorising the previously set values.
Only the options compatible with the
set programme can be selected.
To cancel the program selection, turn
the "SMART RING" to the program
area and press "SET".
When the programme is running, the
display
will show the time to elapse.
Rotating the "SMART RING" all
information about the cycle will be
displayed.
START/PAUSE button
Close the porthole BEFORE pressing
the START/PAUSE button.
14


Need help? Post your question in this forum.

Forumrules
1

Forum

candy-bianca-wm

Reset search

  • I don’t have wifi will this machine work without it? Submitted on 4-7-2023 at 21:29

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Candy Bianca WM at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Candy Bianca WM in the language / languages: English as an attachment in your email.

The manual is 4,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Candy Bianca WM

Candy Bianca WM User Manual - German - 24 pages

Candy Bianca WM User Manual - All languages - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info