734445

Camry Cr 5033 Manual

4
Zoom out
Zoom in
Previous page
1/64
Next page
burns. Take necessary precautions when you turn the iron with the sole plate up. In the
water tank there still might be hot water, even after the iron has been unplugged.
19. DO NOT allow fabrics or flammable materials to have too long contact with the hot iron.
20. The cord should not touch the sole plate while it is hot. After use leave the iron for
complete cooling before putting it away.
21. When you do not use the iron, even for a short time, turn off the steam option.
22. Under no circumstances should you iron clothes and fabrics on people or animals.
23. Never direct steam shot at people or animals.
24. Use the self-cleaning option at least once a month25. The iron must be used on a flat,
stable surface and only on such a surface it must be put away.
26. Never fill the water tank with odorants, chemical or descaling agents.
Device desription (Art..1):
1. Brush 9. water cover
2. Brush lining 10. A cover
3. Brush clip 11. LED Light
4. Head 12. Guiderail
5. Burst button 13. Brush head lock push button
6. Steam button lock 14. handle cover
7. handle 15. Bushings
8. Water tank 16 ORNAMENT
Caution:
a. During the first few uses, the appliance may produce smoke, a harmless odour and a light emission of particles. These are simply the
engineering residues from the manufacturing process burning off. These are harmless and will quickly disappear.
b. The device needs to wait for the LED Light to go off before turning on the steam button for the first time to prevent water from
vaporizing.
c. When the device is used for the first time, there is a delay 40s, and the LED light flashes at the same time. Steam can only be
discharged when the LED light is not flashing.
d. When the device is used, it is accidentally cut off the power supply, and then used again, the PCB program will restart, and it needs
to delay 40s to be used;
FILLING WITH WATER(Art 2)
Remove the mains plug from the wall socket before filling( or emptying) the steam brush with water.
Remove the water tank with two hands at the direction of arrow showed above.
Pull up and Remove the water inlet stopper.
WHAT KIND OF WATER SHOULD I USE?
Your appliance was designed to operate using pure distilled water. However, it is necessary to periodically clean the appliance to remove
any mineral deposits.
Folding(Art..3):
Press the head lock button down and then push the head downwoards.
Using:
We recommended that you test acrylic, nylon or other synthetic fabrics in an inconspicuous area to ensure these fabrics are not
damaged by hot steam
As steam is very hot: never attempt to remove creases from a garment while it is being worn, always hang garments on a clothes
hanger.
Hang your garment on a clothes hanger.
The fabric brush opens the weaves of the fabrics for better steam penetration. Before removing or attaching the steam brush, unplug
your appliance and allow it to cool down.
During use or while unit is heating or cooling do not rest appliance on its head. Place the product on a stable, heat resistant, flat surface,
as the head will be hot. As the appliance heats, the housing becomes warm. This is normal.
Plug-in the appliance, the light is turned on. Wait until the light turn off, the appliance is ready to use.
Press the steam button with the steam brush facing away from you holding it in a vertical position
Wait for an hour for your appliance to cool before storing
Tip: During use or while the unit is heating or cooling, place the product on a flat stable and heat-resistant place.
After use it ,please remove the water tank, empty the water tank completely, then return the water tank to its place on the appliance.
Technical Data:
Voltage: 220-240V~ 50/60Hz
Power: 1200W
4
To protect your environment: please separate carton boxes and plastic bags and dispose them in corresponding waste
bins. Used appliance should be delivered to the dedicated collecting points due to hazarsous components, which may
effect the environment. Do not dispose this appliance in the common waste bin.
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Camry Cr 5033 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Camry Cr 5033 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 3,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info