2. CLOCK 3. INTERNAL TEMPERATURE (AT PLACE SETTING POSITION) 4. DATE 5. EXTERNAL TEMPERATURE OUTDOOR (AT PROBE SET
POSITION) 6. EXTERNAL PROBE
7. COMFORT LEVEL 8. PROGNOSIS
Default mode:
To display the currently set alarm time, press "MODE".
To set the date and time:
1. Press and hold "MODE".
2. The year will be displayed. By using the 1.b "Up" and 1.c "Down" buttons and set the desired year.
3. Press the 1.a "MODE" button. After the 1.b "Up" and 1.c "Down" buttons and set the desired month.
4. Press the 1.a "MODE" button. After the 1.b "Up" and 1.c "Down" buttons and set the desired day.
5. Press the 1.a "MODE" button. After the 1.b "Up" and 1.c "Down" buttons and set the desired 12 hour or 24 hour display format.
6. Press the 1.a "MODE" button. After the 1.b "Up" and 1.c "Down" buttons and set the desired time.
7. Press the 1.a "MODE" button. After the 1.b "Up" and 1.c "Down" buttons and set the desired minute.
8. Press the 1.a "MODE" button. To finish setting the time.
„MAX / MIN” button
After pressing, the maximum temperature registered will be displayed and after the next press the minimum temperature insideand outside will be displayed.
„C / F” button
After pressing, switch between temperature display between Celsius and Fahrenheit
„Light / Snooze”
Turn on the backlight for 5 seconds.
Alarm setting:
1.Press and release the 1.a "MODE" button.
2. Press and hold the 1.a "MODE" button. as the last alarm clock setting is displayed until it blinks.
3. Via the 1.b "Up" and 1.c "Down" buttons and set the desired time. Then confirm by pressing the 1.a "MODE" button ..
4. Through the buttons 1.b "Up" and 1.c "Down" and set the desired minute. Then confirm by pressing the 1.a "MODE" button ..
5. Through the 1.b "Up" and 1.c "Down" buttons and set the desired alarm clock alarm volume. Then confirm by pressing the 1.a "MODE" button ..
After starting the alarm you can press the "LIGHT / SNOOZE" button to delay the alarm by 10 minutes.
Pressing any other button will end the alarm.
To turn on the alarm:
Press and release the 1.a "MODE" button. The time of the set alarm will show then press and release the 1.b "UP" button.
Probe:
On the back of the probe there is a flap that needs to be removed in order to insert the battery.
Please insert the battery into the chamber.
Next to the battery compartment there is a small switch with numbers 1,2,3 corresponding to each position in which it may be located.
The numbers 1,2,3 correspond to the appropriate transmission band between the probe and the weather station.
The "UP" button in the default mode on the weather station allows you to switch between bands.
In order for the probe and weather station to co-operate, they must be set to the same band.
If the probe is set to "2" then we must also set it to "CH2" at the weather station.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Camry CR 1166 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Camry CR 1166 in the language / languages: All languages as an attachment in your email.
The manual is 5,23 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.