800770

Camry CR 1146 Manual

1
Zoom out
Zoom in
Previous page
1/6
Next page
1. Schalter/Wiedergabe/Stoppen
2. Die Frequenzänderungstasten vom Radio/Vor- und Zurückspulen der
Werke/Lautstärkeänderung (langes Anhalten)
3. Equalizer/Radio 4. Telefon-Taste
5. Ladevorgangs-Steckdose 6. LINE-IN-Eingang 7. TF-Karte-Steckdose
Ladevorgang. Das Kabel von einer Seite an die Ladevorgangs-Steckdose von Kopfhörern (5) und
von der anderen Seite an den Computer oder an das Ladegerät anschließen. Während des
Ladevorgangs leuchtet die Diode, die nach Beendigung des Ladevorgangs erlischt. Der
vollständige Ladevorgang dauert ca. 2,5 Stunden.
Kopplung. Die Kopfhörer und das gekoppelte Gerät sollten in einem kleineren Abstand als 1
Meter voneinander sein. Die Kopfhörer auf den Kopplungsmodus durch das Anhalten der Taste 5
Sekunden lang umschalten. Die Diode blinkt nach dem Freigeben der Taste. Das externe Gerät
auf den Kopplungsmodus umschalten und die Kopfhörer aus der Liste wählen. Nach der
erfolgreichen Kopplung blinkt die Diode ca. 3 Sekunden lang. Nach Bedarf die Code 0000
eintragen.
Wiedergabe. Mit den Tasten (2) kann man das Werk vor- und zurückspulen oder die Lautstärke
ändern.
Radio. Um das Gerät in den Radio-Modus umschalten, halten Sie die Taste RADiO (3). Mit den
Tasten (2) können Sie die Frequenz und die Lautstärke ändern.
Telefongespräch. Um den ankommenden Sprachanruf anzunehmen, drücken Sie die Taste (4).
Um das Telefongespräch zu beenden, drücken Sie wiederholt die Taste (4).
1. Inrerrupteur/lecture/arrêt
2. Les boutons de changement de la fréquence du radio / rembobinage des chansons/
changement de volume (tenir longtemps)
3. Equalizer/Radio 4. Bouton de téléphone.
5. Prise d'alimentation 6. Entrée LINE IN
7. Prise de carte TF
La charge. Branchez le câble d'un côté au prise de charge des écouteurs (5), l'autre partie aux
ordinateur ou un chargeur. Pendant la charge, la diode s'allume, elle va s'éteindre après son
achèvement. Une charge complète prend environ 2,5 heures.
Appariement. Les écouteurs et l'appareil associé devraient être d'au moins 1 mètre de l'autre.
Mettez les écouteurs en mode d'appariement en maintenant le bouton pendant 5 s. La diode
commence à clignoter après le relâchement du bouton. Transferez l'appareil externe en mode
d'appariement et sélectionnez les écouteurs de la liste. Après un appariement réussi la diode va
CR 1146
1. Power / Play / Pause
2. Buttons for changing the radio frequency / scrolling tracks / changing volume (long press)
3. Equalizer / Radio 4. Phone button.
5. Charging socket 6. Input LINE IN
7. TF card slot
Charging. Connect the cord from one side to the charging socket (5) on headphones, the other
side to a computer or charger. During charging, the LED lights till battery is full. A full charging
takes approx. 2.5 hours.
Pairing. Headphones and paired device should be not further than 1 meter from each other.
Switch headphones into pairing mode by holding the button (1) for 5 seconds. The LED starts
flashing when the button is released. Switch external device to pairing mode and select the
headphones from the list. After a successful pairing LED flashes for approx. 3 seconds. If
necessary, enter the code 0000.
Playback. Using buttons (2) you can scroll through a track or change the volume.
Radio. To switch to radio mode hold the Radio button (3). Using buttons (2) you can change the
frequency or volume.
Call. To answer an incoming call, press the button (4). To end the call press the button again (4).
Hereby, Adler Sp. z o.o., Ordona 2a, 01-237 Warsaw, Poland declares that the radio
equipment type Bluetooth headphones CR1146 is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet
address:http://www.camryhome.eu/red/cr_1146.pdf
ENGLISH
DEUTSCH
FRANÇAIS
1234
567
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Camry CR 1146 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Camry CR 1146 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 1.84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info