656747
10
Zoom out
Zoom in
Previous page
1/17
Next page
10
Aerial connections
Pre Out
Sub Out
FM aerial
FM external
aerial
(recommended)
AM external aerial
(recommended)
AM loop
aerial
OR
OR
Ground
(optional)
Examples
Using the tuner
Change the tuning mode to Preset, Manual or Scan via 'Input Setup > Mode'
when the FM or AM tuner is selected.
Press the Tuning +/- button on the front panel (or the and buttons on
the remote) to select station.
Frequency increments can be set for AM/FM depending on geographic
location. 'General Settings > AM/FM Tuner Steps'.
Radio Data Systems (RDS)
Press the Info button on the remote to choose:
PS (Station Name) – Current station name will be shown.
PTY (Program Type) – Current program type will be shown.
RT (Radiotext) – Radiotext messages will be shown, if available.
Note: If no valid RDS data has been received the Info button will display the
normal unit information.
Presets
1. Press and hold the Store Presets button on the remote for 5 seconds.
2. Use the Tuning +/- on the front panel or the navigation buttons to select a
preset station number (1-30).
3. Press the Store Presets button on the remote to store the station.
StreamMagic
On the Connect App you can search for an Internet Radio station and then
add it to a Preset memory location in the app.
Operating instructions
To activate the CXR, switch the Power switch on the rear panel to On then
press the Standby/On button on the front panel.
Selecting the source
Select the source by using the Source +/- buttons on the front panel. After
4 to 5 seconds the CXR will select the new source, or it can be selected
by pressing the volume knob. The source selection buttons on the remote
control can also be used to directly select the source.
Selecting the desired listening mode
Select an appropriate mode for the source material/type you are listening to
by pressing the Stereo or Surround Modes button on the remote.
Surround sound modes
The CXR supports several music and home-cinema listening modes. The
output the CXR can provide depends both on the source signal present, the
speaker setup selected and the decode mode selected.
Dolby's lossless audio technology developed primarily for high capacity
Blu-ray discs/players. Dolby True HD delivers theoretically bit-for-bit sound
identical to the studio master by the use of 100% lossless encoding. Previous
formats such as Dolby Digital 5.1 or EX have used lossy encoding where
some data (that is theoretically less audible) is always lost in the encoding
process to reduce the storage capacity needed on the disc. This is a new
format that supports up to eight (usually used as 7.1) full-range channels of
24-bit/96 kHz audio or two channels of 24/192 kHz via Blu-ray discs and is
not backwards compatible with earlier schemes. The format can either be
transmitted as a 'bitstream' to the CXR for internal decoding (recommended)
or can be decoded by some Blu-ray players internally and sent to the CXR
as multi-channel PCM. In both cases an HDMI connection is required to the
CXR and a suitable Blu-ray player as Dolby True HD is only ever transmitted
over HDMI.
An encoding scheme based on the original Dolby Digital CODEC, but with
enhancements to improve coding eciency and improved audio quality.
Dolby Digital Plus supports 7.1 fully discrete channels compared to Dolby
Digitals 5.1 (or 6.1 in its EX variant where the 6th channel is matrix encoded).
These Dolby Digital Plus bitstreams are not backward compatible with legacy
Dolby Digital decoders but require an AV Receiver developed to decode them
(such as the CXR) and an HDMI connection as Dolby Digital Plus is currently
only transmitted over HDMI. It is however a requirement that any Dolby Digital
Plus enabled Blu-ray player must also be able transform the Dolby Digital
Plus into a backwards compatible Dolby Digital 5.1 output for playback on
legacy Dolby Digital systems. The CXR is however fully compatible with Dolby
Digital Plus.
A new lossless audio codec from DTS, rather than being incompatible with
earlier versions, DTS-HD Master Audio is transmitted as an extension to a
normal DTS bitstream. A second embedded stream is sent which contains
the "dierence" between the original studio master and the lossy compressed
DTS, plus the two extra channels. DTS-HD Master Audio enabled devices
(such as the CXR) are able to use this dierence information to recreate a bit
for bit lossless version of the original 7.1 data. Devices which do not support
the Master Audio extension simply decode the original 5.1 DTS stream and
ignore the Master Audio extension providing backwards compatibility.
DTS-HD High Resolution Audio
Known also as DTS-HR an extension to the original DTS audio format. DTS-
HD High Resolution Audio supports 7.1 fully discrete channels compared to
DTS's 5.1 (or 6.1 in its DTS ES Matrix or DTS ES Discrete variants). As with
DTS-HD Master Audio a second embedded stream is sent which contains the
"dierence" between the original studio master and the lossy compressed
DTS, plus the two extra channels, however in this case the extra stream is
also formed by lossy compression. Eectively this is a 7.1 version of DTS
which can be decoded by devices (such as the CXR) which are able to
decode DTS-HD High Resolution Audio. Devices which do not support the
High Resolution extension simply decode the original 5.1 DTS stream and
ignore the High Resolution extension providing backwards compatibility.
Known also as Dolby Digital (3/2) or Dolby Digital 5.1, provides (up to) 5.1
output from suitable encoded Dolby Digital material, with 5 main channels
(Front Left, Front Right, Centre, Surround Left, Surround Right) and a
Low Frequency Eects Channel for the subwoofer, all discretely encoded.
Decoding Dolby Digital requires a Dolby Digital encoded DVD disc and a
digital connection from the source equipment (Such as a DVD player) to the
CXR.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cambridge Audio Topaz SR20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cambridge Audio Topaz SR20 in the language / languages: English as an attachment in your email.

The manual is 6,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cambridge Audio Topaz SR20

Cambridge Audio Topaz SR20 User Manual - German - 13 pages

Cambridge Audio Topaz SR20 User Manual - Dutch - 13 pages

Cambridge Audio Topaz SR20 User Manual - French - 13 pages

Cambridge Audio Topaz SR20 User Manual - Italian - 13 pages

Cambridge Audio Topaz SR20 User Manual - Polish - 13 pages

Cambridge Audio Topaz SR20 User Manual - Swedish - 13 pages

Cambridge Audio Topaz SR20 User Manual - Spanish - 13 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info