497546
10
Zoom out
Zoom in
Previous page
1/12
Next page
10
When Auto mode has been selected, press the button to scroll down
through the station frequencies or press the button to scroll up through
the station frequencies.
The tuner will stop at the first strong signal it finds. To move to another
station simply press the or button again.
Setting presets
Radio stations can be stored into the memory presets for easy access.
You can store up to 15 presets for each band (i.e. 15 presets for the AM
band plus 15 presets for the FM band).
Tune to the station you wish to store and hold down the Mode/Store
button on the front of the unit. The display on the unit will flash the next
available preset.
Press the Mode/Store button again to store the preset. The available
preset will stop flashing to indicate that the station has been stored.
To change the preset number, simply press and hold the Mode/Store
button to enter store mode then select any preset number you require
with the and keys then press the Mode/Store button again to
actually save the preset.
To recall a stored preset, simply press the number on the remote control
that corresponds with the preset. Each of the preset buttons can select
two presets. To select the second preset on the button, press the button
again and this will toggle to the second preset.
To load a stored preset from the front of the unit, simply press the number on
the front the unit or remote that corresponds with the preset. To access the
second preset represented by the button, you must press and hold the button.
: You can only access stored presets 1-8 on the remote preset
buttons. You can access stored presets 1-10 on the front panel preset
buttons. To access all presets, set the mode to ‘Preset’ mode with the
‘Mode’ button on the remote control or ‘Mode/Store’ button on the front
panel, and use the or buttons. This will allow access to the full 15
AM stored presets or 15 FM stored presets.
Resetting tuner presets
To clear all stored presets for both AM and FM, press and hold both the
5/10 and Menu buttons at the same time. The unit will display ‘Reset’.
Restart the unit by powering off and on.
After making any connections to your unit, activate the Topaz SR10 by
pressing the On/Off button on the front of the unit.
Setting the source
Press the Source button on the front of the unit corresponding to your
desired source. Alternatively, you may use the appropriate button on the
remote control.
Adjusting the volume
Use either the Volume Up/Down buttons on the remote control, or the
Volume control on the front of your unit system to change the volume
level. The newly selected level will be indicated briefly on the front display.
The volume is displayed in minus dB where 0dB is the highest level.
A progressively larger negative number indicates the volume is being
reduced.
Adjusting the audio settings
Adjustments to the bass, treble and balance can be made as follows:
1. To enter the audio menu. Press either the Menu button on the front of
the unit or on the remote control.
2. Step through the available settings by pressing the Menu button. The
settings available are in order Bass, Treble and Balance.
3. When you wish to make an adjustment for bass, treble or balance,
simply rotate the Volume control or use the Volume control buttons on
the remote control.
4. To exit, wait for five seconds, until the unit returns to normal mode.
Tuning and listening to the built in tuner
Select the Tuner source using the FM/AM button on the front of the unit,
or directly by pressing the FM or AM buttons on the remote.
Repeatedly pressing the FM/AM button on the front of the unit switches
between FM and AM modes.
: For ease of tuning on first time use, we recommend that you set the
Topaz SR10 to ‘Auto’ mode. Press the Mode/Store button on the front of
the unit. This button cycles through Preset, Auto and Manual, modes.
Operating instructions
Speaker A / BPhonoMP3 / AuxBD / DVDCDFM / AM
BD
/
DVD
CD
FM
/
AM
Speaker A
/
B
Phono
Mode / Store
Mode / Store
1 / 6 2 / 7 3 / 8 4 / 9 5 / 10
Menu
1
/
6
2
/
7
3
/
8
4
/
9
1/5 2/6 3/7 4/8
Presets
Speaker A / BPhonoMP3 / AuxBD / DVDCDFM / AM
Speaker A
/
B
Phono
MP3
/
Aux
BD
/
DVD
CD
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cambridge Audio Topaz SR10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cambridge Audio Topaz SR10 in the language / languages: English as an attachment in your email.

The manual is 1,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cambridge Audio Topaz SR10

Cambridge Audio Topaz SR10 User Manual - German - 12 pages

Cambridge Audio Topaz SR10 User Manual - Dutch - 12 pages

Cambridge Audio Topaz SR10 User Manual - French - 12 pages

Cambridge Audio Topaz SR10 User Manual - Italian - 12 pages

Cambridge Audio Topaz SR10 User Manual - Polish - 12 pages

Cambridge Audio Topaz SR10 User Manual - Swedish - 12 pages

Cambridge Audio Topaz SR10 User Manual - Spanish - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info