497524
16
Zoom out
Zoom in
Previous page
1/20
Next page
16
The Stream Magic 6 will then connect to the network using a saved key (if you have
previously set one) or present you with an alphanumeric entry menu. Here you can
enter the network key you set up when setting up your wireless network.
Select each character in turn using the Navigation/Select dial and then press
or navigate to the
symbol and press Navigation/Select dial to enter that key. If
you make a mistake, press
to go back one character.
The Stream Magic 6 can handle keys in WEP, WPA and WPA2 formats (the choice of
format is made by appropriate settings on your router) and automatically generates
the right format from your text according to the router request.
Enter the network name
This option allows the Stream Magic 6 to search for and connect to a particular
network name only.
Type your network name in using the alphanumeric entry screen.
If no matching network is found 'Network not found' will be displayed.
View Cong
This menu rstly displays the IP mode (static or dynamic). This will be Auto/DHCP
(i.e. dynamic, this is the default) or alternatively Static IP.
For either mode by turning the Navigation/Select dial the Stream Magic 6 will scroll
through the various current IP parameters, for instance the ESSID of the current
wireless network, Wired and Wireless MAC addresses, current IP address, (Sub)
Netmask, Gateway address etc.
Edit Cong
This menu allows the selection of IP mode between static or dynamic (Auto/DHCP).
Auto/DHCP is recommended for most people in most circumstances. Static IP
requires quite a bit of knowledge about IP networks, and is for advanced users only.
The default setting is thus Auto/DHCP, here the Stream Magic 6 obtains its IP
address each time you switch in on by a process called DHCP which means it is
different each time it is acquired. This process is completely automatic and much
simpler than implementing Static IP.
However sometimes it is useful (especially in large networks) to know the exact IP
address of each device, this can only be done by using static IP.
When using Static IP you will also need to enter the network mask you wish to
use and the addresses of your gateway and DNS service, note there is no way for
Cambridge Audio to know what these are in your network. Only select static IP if you
know exactly what you are doing!
To set static IP, select the 'Settings > Network cong > Edit Cong' menu and then
press SELECT.
The Stream Magic 6 will now display 'Auto (DHCP)? YES/NO'. Turn the Stream
Magic 6’s rotary dial to select 'NO' and then press SELECT.
You will now be able to enter the xed IP address you wish to give your Stream
Magic 6 by using the rotary dial to select the desired numbers followed by pressing
Navigation/Select dial to end inputting the address.
The Stream Magic 6 will now prompt you to enter the required network mask for
the network. You will be able to enter this in the same way as before for entering
the IP address.
You will now need to enter the default gateway’s IP address used by the Stream
Magic 6 on the network.
Finally, you will need to enter the DNS IP address for the Stream Magic 6. On some
networks, you may need to enter your ISP’s DNS IP address, which should be
available on your ISP’s support page on their website.
After entering the above information, the Stream Magic 6 will now try to connect
to your network. If you wish to use DHCP again simply select 'Settings > Network
cong > Edit Cong' and then set 'Auto (DHCP)? YES/NO' to 'YES'.
WiFi Strength
Displays the strength of the received WiFi Signal.
Note: If WiFi has been turned off (Ethernet mode only) the signal strength will show
as 0%.
Signal warning
The Stream Magic 6 can display a warning if the Wi-Fi signal strength is low enough
to be causing reduced throughput.The options for the Signal Warning are simply
Yes or No.
Wi-Fi Region
Different parts of the world use slightly different frequencies for Wi-Fi. For best
performance you should set the Stream Magic 6 to the region you live in, the
current options are US, Spain, Europe (i.e. other than Spain), Japan.
Wired/Wireless connection
It is possible to connect your Stream Magic 6 to your network via an available
Ethernet connection (RJ45) or via a Wi-Fi router. By default the unit is in AUTO
mode, each time you turn the unit it looks for the presence of a wired connection,
and tries to use this, if none is present or it cannot connect it then tries to use
the wireless connection and so on. In Auto mode once the Stream Magic 6
has established a certain type of connection to the network, then this type of
connection will remain in use while the Stream Magic 6 is on.
You can alternatively congure the Stream Magic 6 to permanently only use the
wired or wireless connection From the Stream Magic 6’s 'Network cong' menu,
select 'Wired/Wireless'. This menu will present you with three options: 'Auto', 'Wired
Only' and 'Wireless Only'.
Selecting 'Wired Only' will cause the Stream Magic 6 to reboot and then only use
its Ethernet connection to communicate with the network. Selecting the 'Wireless
Only' will cause the Stream Magic 6 to reboot and only use its Wi-Fi connection.
Selecting the 'Auto' option means the Stream Magic 6 will try both and settle on the
one it can make work as described above.
Firmware
This menu item displays some hardware/software version numbers for your
Stream Magic 6. Turn the rotary dial to scroll through the various items.
The Service Pack is the currently loaded rmware software. It’s a good idea to
note this down if you need to contact our technical support people as they may
request it.
The Serial Number and Product Code are not normally required by the technical
support team.
Note: This Serial Number is not the same as the physical serial number on the back
of the product itself.
Firmware
Version
Upgrade
Version
This menu item displays some hardware/software version numbers for your
Stream Magic 6. Turn the rotary dial to scroll through the various items.
The Service Pack is the currently loaded rmware software. It’s a good idea to
note this down if you need to contact our technical support people as they may
request it.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cambridge Audio Stream Magic 6 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cambridge Audio Stream Magic 6 in the language / languages: English as an attachment in your email.

The manual is 3,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cambridge Audio Stream Magic 6

Cambridge Audio Stream Magic 6 User Manual - German - 20 pages

Cambridge Audio Stream Magic 6 User Manual - Dutch - 19 pages

Cambridge Audio Stream Magic 6 User Manual - French - 19 pages

Cambridge Audio Stream Magic 6 User Manual - Italian - 19 pages

Cambridge Audio Stream Magic 6 User Manual - Polish - 19 pages

Cambridge Audio Stream Magic 6 User Manual - Swedish - 19 pages

Cambridge Audio Stream Magic 6 User Manual - Spanish - 19 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info