763807
51
Zoom out
Zoom in
Previous page
1/56
Next page
CAUSE
1. The power plug not connected
2. Power plug and socket
3. The power socket not switched on
1. Cables not properly connected
2. Discs scratched or dirty
3. The unit is in the mute status
1. Cables not properly connected
2. The TV set not properly adjusted
3. The video output system of this player
Does not match the TV input.
1. TV system not right
2. TV set's color saturation not properly
adjusted
3. Video output setting not right
1. No disc in the drive
2. Disc not properly placed
3. Condensation on the laser head
4. Not in the playback mode
5. Wrong disc format
6. Disc dirty
1. Disc information not well stored
2. Wrong buttons pressed
3. External static leakage into the cover
1. T V system not suitable for the disc
1. The system not properly connected
2. No disc or the disc not recordable
3. The disc finalized
4. No space left in the disc
1. The input source is not correct
2. The video output system not adequate
1. Disc error
2. Wrong time settings (system clock or recording
time)
3. The source not work properly when recording
4. Powered off
1. No space left in the recording disc
2. Too bad quality of the recording disc
SYMPTOM
No power
No sound
No picture
No color
No disc
reading
Instantaneous
function failure
Picture rolling
External signals
record failure
No monitoring
signal
Time recording
failure
Recording
abortion
REMEDY
1. Connect the power plug into the wall outlet securely
2. Plug again or change another socket
3. Switch on the power socket
1. Connect cables securely
2. Clean the discs.
3. Press the [MUTE] button again
1. Connect cables securely
2. Reset your TV set's AV/TV status
3. Press the [IS/PS] button
1. Press the [IS/PS] button to reset the system
2. Readjust the TV set's saturation
3. Readjust video output settings
1. Load a disc
2. Reload the disc with the playback side facing down
3. Turn on the power for about 1 hour without a disc before playing
4. Press the [PLAY] button
5. Load the compatible discs
6. Carefully clean the disc with soft cloth outwards from the center
1. Wait for 5-10 seconds and this unit will restore
normal playback.
2. Press the right button
3. this unit
Restart playing after turning off for 1-2 minutes
1. Adjust the TV system
1. Connect the system properly
2. Place a recordable disc
3. Replace the disc
4. Replace the recordable disc
1. Reset the signal source
2. Switch video output system
1. Reload new DVD+R, DVD+RW discs
2. Reset time recording settings
3. Ensure normal working of the source when recording
4. Switch the unit to the standby mode
1. Reload a blank disc
2. Use high quality recording disc
If you experience problems with this unit, please check the chart below for a possible solutions before
requesting servicing
Trouble shooting
APPENDIX
DVD55RWi
49.
51


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cambridge Audio DVD55RWi at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cambridge Audio DVD55RWi in the language / languages: English as an attachment in your email.

The manual is 6,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info