656743

Cambridge Audio CXC Manual

7
Zoom out
Zoom in
Previous page
1/9
Next page
7
CXC
Operating instructions
Loading and unloading discs
1. Press the Open/Close ( ) button.
2. When the disc tray has opened fully, place a disc carefully in the tray with
the label side facing up.
3. To close the disc tray, press the Open/Close (
) button again. When the tray,
with a correctly loaded disc, is fully closed the CD player will read the disc
and display the content information.
4. The disc tray can be opened at any time by pressing the Open/Close (
)
button. Only remove the disc after the tray has fully opened.
Note:
– Do not put anything except a compact disc into the tray. Foreign objects
may damage the mechanism.
– Do not force the tray by hand during the opening and closing operations.
– To avoid dirt and dust entering the mechanism, keep the disc tray closed.
– If the compact disc is badly scratched or too dirty, the player may not be
able to read it or play it.
– Never load more than one disc into the disc tray at any time.
Normal disc play
This unit has been designed to play compact discs, recordable
CDs (CD-R) and re-writable CDs (CD-RW) bearing the
identication logo shown here. No other discs can be used.
Any CD-R/CD-RW discs should contain properly recorded
TOC (Table of Contents) information so that they can be played back. This unit
can play only the discs recorded in the CD-DA format designed for music
reproduction. Do not attempt to play a disc containing other data, such as a
CD-ROM for PCs with MP3 or WMA les, on this unit.
1. Switch on your amplier and set its input selector to the correct position.
Adjust the volume control to a minimum.
2. Press the Open/Close (
) button to open the disc tray and load a disc.
3. Press the Open/Close (
) button again to close the tray. The CD player will
read the disc.
4. To begin playback, press Play (►).
5. When the last track has nished playing, the display will return to Table of
Contents (TOC).
6. To stop the disc at any point, press the Stop () button. Pressing the Pause
() button while the disc is playing will pause the disc and illuminate the
pause icon on the display. Playback can be resumed by pressing the Play
(►) button again.
Locating a specic track during playback
1. A single short press of the Skip/Scan () button will take you to the
beginning of the next track on the CD. Repeat as necessary.
2. A single short press of the Skip/Scan () button will take you to the
beginning of the previous track.
Locating a specic track when playback is stopped
1. A single short press of the Skip/Scan ( ) button will skip between tracks.
2. Press and hold to scroll rapidly through tracks.
3. Press the Play (►) button to start playback from the selected track.
Repeating discs and tracks
1. Ensure that the disc is loaded.
2. Press the Repeat button on the remote control. 'Repeat All' will appear on
the display. Press the Play (►) button. The whole disc will now be repeated
until the function is turned o.
3. To repeat a specic track, press the Repeat button twice while the track is
playing. 'Repeat Track' will appear on the display. Press Play (►) and the
selected track will now repeat until the function is turned o.
Alternatively, press the Repeat button twice, select the chosen track using the
numerical buttons on the remote control and press Play (►).
4. Press the Repeat button again either before or during playback to turn o
the repeat function.
Playing tracks in random order
1. Ensure that a disc is loaded.
2. Press the Random button on the remote control. 'Random' will appear on
the display.
3. Press the Play (►) button. The CD player will now play the entire disc in
random order.
It is also possible to press the Random button during playback to listen to
tracks in random order.
4. Press the Random button to exit the Random function. The disc will
continue playing to the end in the correct order.
5. Press the Stop () button at any time to stop the disc.
Note: Selecting 'Random' mode when 'Repeat Track' has been selected will
automatically cancel 'Repeat Track' mode.
Using the set-up menu
The CXC allow the setting of some options related to Auto Play, Auto Power
Down and the digital lters used by the D/A converters.
1. Press and hold the Stop () button for ve seconds to open the setup
menu.
2. Scroll through the menu (shown below) using the Skip/Scan ( ) buttons.
3. Press the Play (►) button selects a sub-menu. Scroll through submenu
options with the Skip/Scan ( ) buttons. The default setting is indicated
by the symbol .
4. Select an option by pressing the Play (►) button.
5. Return to the sub-menu or exit the options menu by pressing the Stop ()
button.
Note:
– It is not possible to access the set-up menu during disc playback.
– The Stop () button on the remote control cannot be used to open the set-
up menu. Once you have accessed the menu, however, the remote control
can be used to scroll through and select sub-menu options.
O On O 30 Min 1 Hr 2 Hrs
Menu structure
Auto play Auto power down
Auto play setting
If required the CXC can automatically play disks inserted into the drawer
without the Play (►) button having to be pressed. Auto Play is simply enabled
in the menu when desired. The default setting for Auto Play is 'O'.
Auto power down setting
If desired the CXC can shut itself down if not used for a period of time. Power
down after an inactive period (no disk playback or any functions of the player
used) of 30, 60 or 120 minutes can be selected. The default setting for Auto
Power Down is '30 min'.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cambridge Audio CXC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cambridge Audio CXC in the language / languages: English as an attachment in your email.

The manual is 0,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cambridge Audio CXC

Cambridge Audio CXC User Manual - German - 9 pages

Cambridge Audio CXC User Manual - Dutch - 9 pages

Cambridge Audio CXC User Manual - French - 9 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info