656755
24
Zoom out
Zoom in
Previous page
1/40
Next page
24
Dolby Pro Logic and Neo:6 are both available in various guises to decode
appropriately encoded soundtracks. Additionally DSP modes are available to
process sources with no encoding at all. Due to the matrix encoding process
none of these modes incorporate ags that tell the 751R V2 the type of
encoding used in the source material. Thus you must manually select these
modes.
Pressing the Surround Modes button when the 751R V2 has locked to a
DD/DTS bitstream will present more options where possible including Post-
Processed modes.
These are modes that allow extra processing to be applied after the main
surround-sound decoding. For instance Dolby Digital (2/0) + Dolby Pro Logic
II Music. Which adds a 5.1 Dolby Pro Logic decode to a Stereo Dolby Digital
decode to turn 2 channel stereo into 5.1.
For 7.1 Speaker setups, the number of decoding possibilities increases as
shown in the following 'Decode modes' tables. Several extra Post Processing
modes are available using either Dolby Pro Logic IIx or Neo:6.
Incoming Dolby Digital/DTS streams are always shown on the front panel
display as Dolby Digital (x/x).x or DTS (x/x).x, where the bracketed numbers
indicate the active channels in the source material. Active output channels
are shown by the icons on the right hand side of the front panel display.
Possible incoming DD/DTS types are:
(1/0) Mono, Centre channel only
(2/0) Left/Right stereo
(2/0).1 – Left/Right stereo and LFE (Sub)
(2/2) Left/Right stereo and Left/Right surround
(3/0) Left, Centre, Right
(3/0).1 – Left, Centre, Right and LFE (Sub)
(3/2).1 5.1: Left, Right, Centre, Left Surround, Right Surround and LFE
(Sub)
(3/4).1 7.1: Left, Right, Centre, Left Surround, Right Surround,
Surround Back Left, Surround Back Right and LFE (Sub)
Operating instructions
To activate the 751R V2, switch the Power switch on the rear panel to On
then press the Standby/On button on the front panel.
Selecting the source
1. Select the desired source by pushing the corresponding source button on
the front panel or remote control.
2. If necessary, press the Audio Input Type button to select the input mode
of the source equipment, either analogue, digital or HDMI (depending on
the connection made on the rear panel). You may have already assigned
this in the 'Audio In/Out Setup Menu' in the OSD.
The digital, analogue or HDMI icons on the display show which is the
currently selected input type.
Note: The 751R V2 stores the input type for each source so that it is
automatically recalled when that source is selected again.
Selecting the desired listening mode
Select an appropriate mode for the source material/type you are listening to
by pressing the Stereo or Surround Modes button and cycling through sub-
modes where available.
In all cases the rst time a mode button is pressed the 751R V2 will report
the current decoding mode on the front panel display. Pressing the button
again will then cycle to the next available mode (if there is one). If no button
is pressed for 4 or 5 seconds the 751R V2 returns to normal operation
without changing mode.
Stereo Modes – Selects 2 channel Stereo operation for stereo material,
pressing again selects Stereo + Sub mode.
This is a digitally processed mode that allows bass and treble controls, and
sub generation if required. The input can be either analogue (in which case it
will be turned into digital by 24 bit A/D conversion) or natively digital.
Surround Modes Selects a range of digital surround modes for the
appropriately digitally encoded material
Note: Some Surround Sound types (such as the Dolby and DTS HD) are
available only from Blu-ray disc over HDMI.
Pressing the Surround Modes button will cause the 751R V2 to lock onto
the incoming bitstream and select the rst available mode for the current
bitstream type.
In some circumstances (see tables) pressing the button again will switch to
an alternative decoding option.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cambridge Audio Azur 751R V2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cambridge Audio Azur 751R V2 in the language / languages: English as an attachment in your email.

The manual is 12,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cambridge Audio Azur 751R V2

Cambridge Audio Azur 751R V2 User Manual - German - 40 pages

Cambridge Audio Azur 751R V2 User Manual - Dutch - 40 pages

Cambridge Audio Azur 751R V2 User Manual - French - 8 pages

Cambridge Audio Azur 751R V2 User Manual - Italian - 40 pages

Cambridge Audio Azur 751R V2 User Manual - Polish - 40 pages

Cambridge Audio Azur 751R V2 User Manual - Spanish - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info