656755
8
Zoom out
Zoom in
Previous page
1/40
Next page
8
Volume
Increase or decrease the volume of the AV receiver output.
Also used as up/down in the OSD setup menus.
Enter
Used in the OSD setup menus.
Tune / Left & Right
Press the right arrow to increase tuner frequency/change
preset. Press the left arrow to decrease tuner frequency/
change preset. Also used to scroll left/right in the OSD
setup menus.
Mute
Mutes the audio on the AV Receiver. Press again to cancel
mute.
Picture adjustment
Press to select various picture adjustments for sources
that have the Scaler set to Process only.
An adjustment bar will appear on the TV for the current
item (Brightness, Contracts etc.) Press the Pic. Adj. button
again to move to the next item. Use the volume buttons to
make the adjustments.
Pressing and holding Pic. Adj. when the OSD is active
switches the active HDMI output. See later 'HDMI A and
B outputs' section.
Lip sync
Press to activate and adjust the lip sync delay function if
the audio and video appear out of sync. While the Lip sync
delay status is shown on the units display, use the Vol
and Vol
buttons to adjust the delay time. Adjusting the
value to zero causes lip sync delay to be turned off. See
later section in this manual.
Info
Press to view the current source material and decoding
mode. Press again whilst the current decoding mode
is scrolling (as long as mute is not on) to display the
incoming sample rate. When listening to FM with RDS,
press to cycle round various RDS information modes.
Dim
Adjust the backlight of the front panel display; off, dim,
bright or very bright.
Tuner AM/FM, BD/DVD, Video 1, Video 2,
Rec 1, Aux/TV, CD, Rec 2, Vid 3/MP3, USB,
Exp.
Press the corresponding button to change the input
source. Pressing the Tuner AM/FM button a second time
toggles between AM and FM modes.
Pressing the Aux/TV button a second time if ARC is enable
(see later section) selects TV-ARC (Audio Return Channel).
Note: Expansion (Exp) button is only used with older AV
receiver.
The above button descriptions are naturally brief. Please
refer to the 'Operating Instructions' section of this
manual for more information on the relevant functions
implemented.
7.1 direct
Selects the 5.1/7.1 direct input.
& Trigger A/B
Toggle On and Off the Trigger outputs. See trigger section
for details and setup.
Main remote control
The 751R V2 is supplied with an Azur Navigator remote
control. Insert the supplied AAA batteries to use. For full
details of the various adjustment functions available from
the remote, refer to the later sections of this manual.
This remote can be used in the Main Zone or Zone 2 (via
an IR repeater system) and will automatically affect only
the Zone in which it is used.
Backlight button
Press to turn the backlight on and illuminate the remote
control buttons. Press and hold for a few seconds (all
buttons will initiate a rapid ashing) to enable backlight
function by pressing any buttons on the remote. Press and
hold again to disable function and revert to default.
Standby/On
Switches the unit between Standby mode and On.
HDMI preview
Press to see the previews of different HDMI sources
connected to the unit. Use Vol
and Vol buttons to
navigate. See later section of the manual.
Analogue direct
Directly selects a stereo analogue input for the current
source with no A/D or D/A conversion or DSP processing.
Stereo modes
Selects Stereo or Stereo + Sub modes for Analogue or
Digital sources (digitally processed).
Surround modes
Selects digital surround processing modes and various
matrix encoded surround processing modes for analogue
or digital sources (digitally processed).
Stereo/Mono
When listening to FM, press to alternate between stereo
and mono modes.
Store
Press to store the current frequency as a preset when in
Tuner mode.
Mode
Press to select Auto/Manual or Preset tuning when in
Tuner mode.
Audio in type
Switches the audio between the types available for the
current source. Depending on the source selected and
whether you have assigned an HDMI input to it, Analogue,
Digital and HDMI can be available.
Bass/Treble
Press for bass/treble adjustment, using the Volume up/
down buttons. Note: Bass/Treble is bypassed in analogue
stereo direct and 7.1 direct modes.
Zone 2
Selects Zone 2 and displays its status on the display.
The next source change, Standby/On or volume control
commands will affect Zone 2 instead of the Main Zone.
See Zone 2 section for details.
On-screen display (OSD)
Press to turn on and off the on-screen setup menus for
display on your monitor/screen.
Source button
Press to cycle through different sources.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cambridge Audio Azur 751R V2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cambridge Audio Azur 751R V2 in the language / languages: English as an attachment in your email.

The manual is 12,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cambridge Audio Azur 751R V2

Cambridge Audio Azur 751R V2 User Manual - German - 40 pages

Cambridge Audio Azur 751R V2 User Manual - Dutch - 40 pages

Cambridge Audio Azur 751R V2 User Manual - French - 8 pages

Cambridge Audio Azur 751R V2 User Manual - Italian - 40 pages

Cambridge Audio Azur 751R V2 User Manual - Polish - 40 pages

Cambridge Audio Azur 751R V2 User Manual - Spanish - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info