656752
22
Zoom out
Zoom in
Previous page
1/28
Next page
22
Audio Return Channel
The 551R V2 supports an Audio Return Channel (ARC) function from TVs that
also support this function (which must feature an HDMI 1.4 input and have
actually implemented the ARC feature, see your TVs manual).
ARC allows a TV to send audio back down its incoming HDMI lead to the
551R V2's HDMI 1 output socket. This function allows the 551R V2 to play
back the audio from a TVs built-in terrestrial cable or satellite tuner whilst
you watch it's picture.
To enable the use of ARC navigate to the select TV– ARC and use the
buttons on the remote to select the Enabled setting.
azur 551R
Video In. Select
Audio In. Select
Tone/Sub Config.
Speaker Config.
Speaker Distance
Speaker Level
Speaker Xover
Auto Setup
Advanced Setup
OSD Setup
BD/DVD
CD/Video1
Video2
Video3
Tape/MD/CDR
Aux/TV
7.1 Direct
Preamp Out
HDMI 1 out TV ARC
HDMI 1 out to TV
Back : [I/O]
HDMI < >
HDMI < >
HDMI < >
HDMI < >
Digital < >
HDMI < >
Analog
Normal < >
Enabled < >
Disable < >
Using ARC
ARC can be started in one of two ways. If your TV supports it there may be a
menu item to start ARC on your TV.
Your TV then sends commands to the 551R V2 which cause it to start an ARC
session and 'TV-ARC' will appear on the front panel display automatically.
Some TVs may also start an ARC session whenever you select the in-built
tuner and stop when you select another source.
Alternatively you can start ARC by pressing the Aux/TV button twice on the
551R V2 (as long as TV-ARC has been enabled in the 551R V2s OSD as
above).
The rst press selects Aux or the Aux button, the second selects ARC and
'TV-ARC' appears on the front panel display. The 551R V2 will then send
commands to the TV over HDMI to try to start an ARC session.
To nish ARC simply disengage it on your TV or press a different source
button on the 551R V2.
Audio split mode
In some circumstances the 551R V2 is able to allow the user to view one
source whilst listening to another. For instance you could watch the video
of a sports channel whilst getting an audio commentary from another such
as the Tuner.
To perform Audio Split:
1. Select the source you wish to watch in the normal way.
2. Press and hold the button for the source you wish to listen to. After 4
seconds approx. "Audio Split" will scroll across the display and you will now
be listening to that source instead. Video will not have changed.
1 2
The 551R V2 allows splitting from any source whatever its video input type
but only to sources where analogue or digital audio is the current audio input
type, not HDMI.
Operating instructions cont.
If the combination is not allowed "Mode Unavailable" will instead scroll
across the display and no change will be made.
To cancel audio split mode simply select a new source and normal operation
will be resumed.
Advanced setup
For most users the basic four stage setup process (Page 22 onwards) should
be sufcient for normal use.
However the 551R V2 also features many more advanced settings for
users who wish to further customise the settings and operation to personal
preference.
Sub crossovers and bass management
As covered in the '551R V2 Setup' section the 551R V2 performs bass
management for any speaker that is set to 'Small' in the OSD. This means
that bass for speakers that are unable to reproduce bass effectively is
instead routed to the subwoofer.
azur 551R
Video In. Select
Audio In. Select
Tone/Sub Config.
Speaker Config.
Speaker Distance
Speaker Level
Speaker Xover
Auto Setup
Advanced Setup
OSD Setup
Front L/R
Center
Surr. L/R
Surr. LB/RB
Back: [I/O]
80Hz < >
80Hz < >
80Hz < >
80Hz < >
The crossover adjustments in the Speaker crossover menu are used to
determine the point as which this transition is made. In other words they set
the frequency below which bass is routed away from any 'Small' speakers
and into the Subwoofer channel. It should be understood that bass sent to
the subwoofer by bass management is different to bass encoded into the
surround-sound material as a dedicated Low Frequency Effects channel.
If the source material contains a separate LFE channel (i.e. DD or DTS
material) this is always routed to the subwoofer (if it is On) and is not affected
by the crossover setting. Some encoding types (Such as Dolby Pro Logic II/IIx
and Neo:6) do not actually have a LFE channel.
The default setting for all bass management crossovers is 80Hz and is a
good global starting point. If you do not wish to make any adjustments simply
leave all crossovers at this default setting.
Note: These settings are actually only used for speakers that have been set
to Small in the Speaker Cong. menu.
For advanced users it is however possible to adjust the speaker crossovers
used for any speakers set as 'Small' independently to allow for the fact that
you may wish to direct bass away from front oorstanding speakers (and to
the Subwoofer) at perhaps 50Hz but away from Surround Left and Rights at
perhaps 100Hz. If you wish to make these adjustments it is best to consult
your loudspeaker manufacturers documentation or contact your dealer to
determine the frequency response of your system and where each speaker
types bass response starts to tail off (often called the 3dB or 6dB roll off/
cutoff point). This would be approximately the point the corresponding
crossover should be set to.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cambridge Audio Azur 551R V2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cambridge Audio Azur 551R V2 in the language / languages: English as an attachment in your email.

The manual is 5,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cambridge Audio Azur 551R V2

Cambridge Audio Azur 551R V2 User Manual - German - 28 pages

Cambridge Audio Azur 551R V2 User Manual - Dutch - 28 pages

Cambridge Audio Azur 551R V2 User Manual - French - 28 pages

Cambridge Audio Azur 551R V2 User Manual - Italian - 28 pages

Cambridge Audio Azur 551R V2 User Manual - Polish - 30 pages

Cambridge Audio Azur 551R V2 User Manual - Spanish - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info