536888
14
Zoom out
Zoom in
Previous page
1/17
Next page
RMD 212BT MANUAL
RDS Operation
1. AF-ALTERNATIVE FREQUENCY
Press and hold the volume button so
that the unit will choose the strongest
FM signal for the selected station, so
that you do not have to re-tune the
stations when driving between differ-
ent transmitter coverage areas. When
AF is on, it means RDS information
is received; when AF is flashing, it
means RDS information is not yet re-
ceived.
2. TA - TRAFFIC ANOUNCEMENT
Press and hold the TA button so that
the unit will be activated for reception
of traffic announcement from local ra-
dio stations.
To choose the TA mode, press the
sound select button for 2 seconds, the
display will show TA SEEK. Rotate
the encoder volume to choose be-
tween the TA SEEK and TA ALARM,
after chooisng, please leave the unit
idle for the mode to activate. In TA
SEEK mode, the unit will seek for traf-
fic announcement programme when
TA is pressed; in TA ALARM mode,
no TA/TP is displayed and the alarm
is set off.
3. PTY - PROGRAMME TYPE
This radio will allow you to select the
type of programme required, and will
search for a station broadcasting that
type of programme. Press and hold
the PTY button once to show the
music type. Then press 1-6 button
to choose the different music types
available.
Press the PTY button twice to show the
speech type programme. Then press
1-6 button to choose the different
speech type programme. Each num-
ber keye will show 3 different speech
programme for you to choose.
4. MASK DPI - MASK ALL
Press the sound select button for 2
seconds, the display will show TA
SEEK. Press the sound select button
again so that the unit will show MASK
DPI. Rotate the encoder volume to
toggle between MASK DPI and MASK
ALL mode. Then leave the unit idle for
the mode to take effect. During MASK
DPI mode, the unit will mask only
the AF which has different PI, this is
the default mode; during MASK ALL
mode, the unit will mask the AF which
has different PI and no RDS signal
with high field strength.
5. RETUNE S/L - SHORT/LONG
This function is to set the initial dura-
tion of automatic TA Search -- Press
and hold the sound select button until
“TA SEEK” is shown on the LCD, then
press the SEL button to cycle through
the menu selections until “RETUNE_
S” is shown, use the VOL +/- button to
choose “RETUNE_S” or “RETUNE_
L”. The default is “RETUNE_S”.
RDS Operation
RDS-EON CONTROL
This unit is equipped with the latest
technology of EON control, so that
when you are listening to Radio or CD,
if there is any travel announcemnet
from a nearby local station, the radio
will already know the frequency of
that radio station. Then it will receive
the station, turn up the volume, or
interrupt the playback of the music
for the duration of the announcement.
At the end of the announcement the
radio will return to its previous state
ready for the next announcement.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Caliber RMD212BT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Caliber RMD212BT in the language / languages: English as an attachment in your email.

The manual is 1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Caliber RMD212BT

Caliber RMD212BT Quick start guide - English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Spanish - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info