Rejecting an incoming call
User can press “CLEAR(BAND)” button to reject the incoming call.
The audio output of the present mode will be muted and the ringing tones will be heard,
if an incoming call is not being answered.
After pressing the “CLEAR”(BAND) button,
the mute of the present mode will be released.
OUTGOING CALL
Use the mobile phone which paired with this unit to making an outgoing call.
During the talking mode, the LCD Display will display “TALKING... ”
User can use the volume up/down to adjust the volume level.
To end the conversation, press the “CLEAR(BAND)” button .The unit will switch back to
the previous mode automatically.The mute of the previous mode will be released at the
same time.
During the talking mode, if the Ignition is being turned off, the unit will keep the
conversation even if the Ignition is Switched off.After finished the conversation, User can
press “CLEAR(BAND)” button to switch off the unit.
Once the “ ” is display on the LCD, press the AUDIO button to activate the
manual Dis-Connect mode.
If the Dis-Connection is successful, the LCD Display will display “ ”.And the
unit will switch back to the previous mode automatically.
CALL TRANSFER
To audio transfer from head unit back to the mobile phone
During the talking mode, user can LONG press the “TRANSFER”(MODE) button more than
3 seconds to transfer the audio from the unit back to the mobile phone for privacy reason.
The LCD Display will CALL TRANSFER
After the “Transfer” button is pressed, the mute of the present mode will be released at
the same time.
Depending on different type of Mobile Phone, the time need for activating the CALL
TRANSFER mode is different. Like Nokia Mobile Phone usually takes 3-5 seconds after
pressed the "TRANSFER” button for audio transfer back or forth through Unit to mobile
phone.
HIGHLIGHT FEATURES
Incoming call ringing volume
Preset the Ringing volume level for any incoming call.
Pls see “MENU”- “PHONE VOL” for details operation.
ENGLISH
36
The unit can be re-connected by the following methods.
Access into MENU “RECONNECT” mode to activate the manual RE-Connection.
Pls see MENU Operation for more details of how to access into MENU mode.
Once the “RECONNECT” is displayed on the LCD, press the AUDIO button to activate the manual RE-Connect mode.
1.Keep the mobile phone within 2 Meter from the unit when making the connection.
2.The manual re-connect is only function with the Mobile Phone has already been
paired with the unit before.
The LCD Display will displayed “RECONNECT” during the connecting period.
If the re-connection is successful, the LCD Display will display “RECONNECT OK! and the unit
will switch back to the previous mode automatically.
If the re-connection failed, the LCD Display “RECONNECT FAIL” will display and the unit will
switch back to the previous mode automatically.
>>
The unit will be Auto Re-Connection by following operation .
Every time turn the ignition key from off to on, the unit will Auto re-connect with the mobile
phone one.
Dis-Connection of the Bluetooth System
The unit have a option function for user to disconnect the Blue Tooth system with the unit.
The unit can be Dis-connected by the following methods.
Access into MENU - RECONNECT mode, then rotate the encoder volume knob to select
the “DISCONNECTION”mode.
Pls see MENU Operation for more details of how to access into MENU mode.
Once the “DISCONNECT” is display on the LCD , press the AUDIO button to activate the
manual Re-Connect mode.
The LCD Display will displayed “DISCONNECT... ” during the Dis-connecting period.
If the Dis-Connection is successful, the LCD Display will display “DISCONNECT OKE! ”.And the
unit will switch back to the previous mode automatically.
INCOMING CALL
Answering an incoming call
When there is an incoming call, the LCD Display will display If the
incoming call has no , the LCD will display “CALL ANSWER? ” User can
press the “PHONE(AUDIO)” button or “MODE” button to answer / accept the call.
The audio output of the present mode will be muted and the ringing tones will be heard
if an incoming call is not being answered.
User can use the volume up/down to adjust the volume level.
To end the conversation, press the “CLEAR(BAND)” button.The unit will switch back to the
previous mode automatically and release the mute of the previous mode at the same time.
An incoming call under stand by mode (Ignition on & Power Off) The system will
automatically switch on the head unit.
While there is an Incoming call or under talking mode, the Panel Open/Eject key is disactivated.
37
