497330

Caliber MCD 068 Manual

6
Zoom out
Zoom in
Previous page
1/6
Next page
16-21. PRESET STATION MEMORY AND TOP/>||, INT, RPT, RDM BUTTONS
a) During radio mode:
When pressed briefly, these buttons select a preset station directly. If the six
buttons are pressed for more than 2 seconds, the station currently being
listened to is memorized into the selected preset button.
b) During SD/MMC or USB mode:
Press the TOP/>|| button briefly to interrupt the playback of the SD/MMC
card or USB stick.
Press again to resume normal playback.
Press the INT button to play the first 10 seconds part of each track, and the
LCD will display INT ON.
Press again to stop scan, while the currently selected track will be played, and
the LCD will display INT OFF.
Press the RPT button to play the current track repeatedly, and the LCD will
display RPT ONE.
Press again to cancel this function, and the LCD will display RPT OFF.
Press the RPT button twice continuously to play the tracks in the current
folder repeatedly and the LCD display will show RPT ABM.
Press the RDM button to play all tracks in random order, and the LCD will
display RDM ON.
Press again to cancel this function, and the LCD will display RDM OFF.
Press the radio preset button 6 and 5 button to move up and down10 tracks
at a time.
When the remained total tracks is lack of 10, the both buttons are inactively.
22. AUX INPUT JACK
Press the mode button to select auxiliary input playing mode. You can connect
any matched external audio device to the auxiliary input jack. Use the volume
control to adjust volume.
23. USB SOCKET
When needing to play the file in the USB stick, insert the USB stick into the
USB socket. The system will change into the USB mode automatically, and
then play the first file in the USB.
2) When briefly pressing, the radio searches for each preset station in the current
band and holds at that preset number for 5 seconds with releasing mute, and
then search again.
During SD/MMC or USB mode:
Press the AS/PS button briefly, it is activated selecting TRACK SEARCH mode:
In TRACK SEARCH mode, the LCD will display TRK T 000 and flash the biggest
digit 0 that the SD/MMC card or USBstick contain.
Then press the VOL+ or VOL- button to select the number of the flashing digit
from 0 ~ 9. Then press BND button to confirm the number and flash next
smaller digit 0.
With the same means, select the number of the flashing digit. After finishing
selecting the number of all flashing digit, press BND button to play the track
of the selected serial number.
Page 5 Page 6
24. MMC/SD CARD SLOT
When you need to play the file in the MMC/SD card, insert the MMC/SD card
into the MMC/SD card slot. The system will change into the MMC/SD mode
automatically, and then play the first file in the MMC/SD.
Note:
When MMC/SD card and USB stick are both inserted into their slot or socket,
the system will change into the playback mode of the latter one.
25. FLASHING LED
When the front control panel is removed this indicator flashes.
26. RESET BUTTON
Before operating the unit for the first time, or after replacing the car battery
or changing the connections. You must reset the unit.
Press this button with a cuspidal object. This operation will erase the clock
setting and some stored contents.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Caliber MCD 068 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Caliber MCD 068 in the language / languages: English as an attachment in your email.

The manual is 1,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Caliber MCD 068

Caliber MCD 068 Quick start guide - English, German, Dutch, Italian, Polish, Portuguese, Swedish, Spanish - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info