584844
2
Zoom out
Zoom in
Previous page
1/2
Next page
1
ASSEMBLY INSTRUCTIONS FOR MODELS 98345S & 98346S
(FOR INSTRUCTIONS ON HOW TO USE THE APPLIANCE, PLEASE SEE THE REVERSE SIDE)
NOTE! THE BBQ UNIT IS FULLY ASSEMBLED.
Ÿ PLACE THE BBQ UNIT, LYING
ON ITS BACK, ON A FLAT,
LEVEL SURFACE.
Ÿ ALIGN THE SPACER WITH THE
CORRESPONDING HOLES ON
THE LEG.
Ÿ FASTEN LEG & SPACER TO
BBQ BODY USING M6x70mm
SCREWS SUPPLIED.
Ÿ DO NOT TIGHTEN SCREWS.
Ÿ REPEAT THE ABOVE FOR THE
REMAINING LEGS.
Ÿ FIT THE BOTTOM PANEL TO
THE FRAME BY ALIGNING THE
HOLES IN THE BOTTOM PANEL
WITH THE HOLES ON THE
LEGS, SECURE IN POSITION
USING THE M6x12mm
SCREWS SUPPLIED.
Ÿ DO NOT TIGHTEN THE
SCREWS.
Ÿ FIT THE SMALL CASTOR WHEELS
TO THE FRAME ALIGNING THE
THREADED STUD ON THE WHEEL
WITH THE HOLE UNDERNEATH THE
LEG. SCREW THE WHEEL INTO THE
LEG. FASTEN SECURELY.
Ÿ PUSH THE AXLE THROUGH THE
WHEEL AND ALIGN WITH THE
CORRESPONDING HOLE ON THE
LEG. FASTEN THE WHEEL TO THE
FRAME USING THE M10 NUT
SUPPLIED. FASTEN SECURELY.
Ÿ FIT THE HUB CAP BY CLIPPING IT
ONTO THE WHEEL
2 3
Ÿ FIT THE CYLINDER HOOK TO
THE BBQ USING THE
M6x12mm SCREWS AND M6
NUTS SUPPLIED.
Ÿ FIT THE CYLINDER SUPPORT
TO THE FRAME USING THE
M5x10mm SCREWS SUPPLIED.
Ÿ PLACE THE FLAME TAMER
OVER THE BURNER. EACH
BURNER MUST BE FITTED
WITH A FLAME TAMER.
Ÿ FIT THE RIBBED GRILL PLATE
BY SIMPLY PLACING IT INTO
THE BBQ UNIT.
Ÿ ALIGN THE HANDLE AND HOOK WITH THE
CORRESPONDING HOLES IN THE BBQ LID.
Ÿ FIX IN POSITION USING THE M4x6mm
SCREWS SUPPLIED.
Ÿ FIT THE LID SIMPLY BY
PLACING IT ONTO THE
BBQ UNIT.
4
6
5
7
Ÿ TURN THE UNIT UPRIGHT AND
PLACE IT ON A FLAT SURFACE.
Ÿ LEVEL THE UNIT OUT AND
FASTEN ALL SCREWS
SECURELY.
Ÿ FIT THE DRIP TRAY BY
SLIDING INTO THE BBQ UNIT
FROM THE REAR.
Ÿ FIT THE OIL CUP TO THE DRIP
TRAY BY SLIDING IT INTO THE
BRACKET SITUATED
UNDERNEATH THE DRIP TRAY.
Ÿ FOR MODEL 98346S FOLLOW
STEPS 1 TO 6.
Ÿ FIT THE SIDE TRAY TO THE
FRAME BY ALIGNING THE
HOLES IN THE BRACKET,
SITUATED UNDERNEATH THE
SIDE TRAY, WITH THE HOLES
ON THE INSIDE OF THE LEGS.
Ÿ SECURE IN POSITION USING
THE M6x12mm SCREWS
SUPPLIED.
Ÿ FIT THE LID SIMPLY BY
PLACING IT ONTO THE
BBQ UNIT.
9
8
2006/B
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cadac 98345S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cadac 98345S in the language / languages: English as an attachment in your email.

The manual is 1,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info