684159
5
Zoom out
Zoom in
Previous page
1/8
Next page
44
4. Fitting and Changing the Gas Cylinder
Before connecting the appliance to a gas cylinder, ensure that the rubber seal on the Regulator is in position and in good condition.
Carry out this check each time you  t the appliance to a gas cylinder.
Blow out any dust from the cylinder opening to prevent possible blockage of the jet.
Ensure that the appliance valves are in the off position by turning the knobs fully clockwise to their stop.
Ensure that the gas cylinder is  tted or changed in a well-ventilated location, preferably outdoors, away from any source of
ignition, such as naked  ames and away from other people.
Make sure that the gas cylinder is kept upright at all times, connect to the cylinder by screwing on hand tight until fully
engaged.
Ensure that a complete gas seal has been made (check for the smell of gas around the connection joint). If there is a leak on
your appliance (smell of gas), take it outside immediately into a well-ventilated  ame free location where the leak may be detected
and stopped. To check for leaks on your appliance, do it outside using warm soapy water only, which is applied to the joints and
connections of the appliance. A formation of bubbles will indicate the gas leak. Do not check for leaks with a naked  ame.
If you cannot rectify the gas leak do not use the appliance, contact your local CADAC stockist for assistance.
CADAC gas cylinder valves must only be repaired by an authorised CADAC service centre or dealer.
When changing a gas cylinder  rstly close the appliance control knobs and then the cylinder valve, making sure the  ame is
extinguished, unscrew the regulator. Re- t the regulator to a full cylinder following the same precautions as described above.
Product Code: 202M0-10
Lid
Pot Stand
Burner
Control Knob
GB
503-0617 LEV7 (202M0) 2 Cook Classic - User Manual (EU & SA).indd 4 02/10/2017 11:58:14
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cadac 202M0 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cadac 202M0 in the language / languages: English as an attachment in your email.

The manual is 0,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cadac 202M0

Cadac 202M0 User Manual - German - 8 pages

Cadac 202M0 User Manual - Dutch - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info