Manual Byron 7721 (page 1 of 1) (English)

609592

Zoom out

Zoom in

1/1

TRANSFORMER USE ONLY.

The London / Striker bell is powered by an 8-

12 volt 1 amp transformer (not supplied)

Wire the bell to terminals 2 & 3 as shown in

diagram.

For London bells.

Replace the wooden cover and mount to the

wall, screwing through the holes provided at

the top of the London Bell. Fix the bell to the

wall using the screws & plugs supplied.

For Striker bells.

Replace the chrome cover and mount to the

wall, Using the wall fixing holes shown

opposite. Fix the bell to the wall using the

screws & plugs supplied.

IMPORTANT

DO NOT WIRE DIRECTLY TO THE MAINS.

IF IN DOUBT PLEASE CONSULT A

QUALIFIED ELECTRICIAN.

110 volt Input

8 - 12 v, 1 amp

Output

Transformer

Mains

Input

Wall fixing hole

How loud is it? (dB @ measured distance)

How does it compare with a Friedland bell for loudness? Submitted on 21-5-2018 at 18:01
Reply Report abuse
Hi,
An electrician installed my bell, which has been working fine for three months and has just stopped, but I cannot figure out why. All connections appear ok.
Any ideas?
Thanks,
Wayne
Submitted on 15-4-2017 at 14:02
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Byron 7721 in the language / languages: English as an attachment in your email.

The manual is 0,02 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Byron 7721 Manual

Product: