Manual Bushnell StableView 181035 (page 5 of 83) (English, German, French, Italian, Portuguese, Spanish)

587303

Zoom out

Zoom in

1/83

QUICK REFERENCE GUIDE

1) Load two AA alkaline batteries into the compartment on the handstrap.

2) Press the Power button (a) to turn on. The electronic system will start up, and the binoculars will go

to Standby mode after about five seconds. (LED indicator stops blinking

3) Adjust the eyepiece spacing (b) to match the distance between your two eyes.

4) Use your left eye as you adjust the focus control knob (c). When the image becomes sharp, use your

right eye and turn the diopter adjustment ring (d) to focus for the right eye. Once you have performed

the diopter correction, use only

the control knob (c) to check focus again.

5) Turn the stabilization lever (e) to the ACTIVE position to activate the stabilization feature.

6) Press the power button briefly to change to fine mode, which is more effective at countering hand

shake. Tap the power button again to return to normal mode.

7) When finished, turn the stabilization lever (e) to the HOLD position and press the Power button (a)

to turn off.

LED Status

Lit in orange Standby (stabilization off)

Lit in green Stabilization active (normal)

Flashing in orange/green Fine mode

Lit in red Batteries should be replaced

Flashing in red System problem

Off Power Off

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bushnell StableView 181035 in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,63 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bushnell StableView 181035 Manual

Product: