481953
4
Zoom out
Zoom in
Previous page
1/28
Next page
4
How Does “GPS” Work?
GPS stands for “Global Positioning System”. Launched by the United States Department
of Defense, GPS consists of a constellation of 24 satellites orbiting the earth at nearly
11,000 miles. These satellites are traveling at a speed that allows them to circle the earth
twice each day while emitting a very low power signal. The signals are timed by clocks
that are highly accurate and are received by one of 5 ground stations. These ground stations
use the precisely timed signal to determine each satellite’s exact position in orbit. Your
GPS receiver can “hear” the signal sent by the satellite. By calculating the position and
distance of at least 4 satellites, accurate latitude, longitude and altitude location information
can be determined. WAAS adds to your GPS’s accuracy. WAAS stands for Wide Area
Augmentation System. WAAS was designed by the United States Federal Aviation
Administration, primarily to add in the accuracy of GPS for planes. WAAS consists of the
group of additional ground stations placed at known and precisely located spots. These
ground stations then work with a master station to correct the satellite signals improving
accuracy to within nearly 3 meters. WAAS reception may be turned on in the SET page
menu-however, the default setting is “Off” due to the additional battery drain it causes.
Software License Agreement
BY USING THE ONIX, YOU AGREE TO BE BOUND BY THE TERMS AND CONDITIONS OF
THE FOLLOWING SOFTWARE LICENSE AGREEMENT. PLEASE READ THIS AGREEMENT
CAREFULLY.
Bushnell grants you a limited license to use the software embedded in this device (the “Software”) in
binary executable form in the normal operation of the product. Title, ownership rights and intellectual
property rights in and to the Software remain with Bushnell.
You acknowledge that the Software is the property of Bushnell and is protected under the United
States of America copyright laws and international copyright treaties. You further acknowledge that
the structure, organization and code of the Software are valuable trade secrets of Bushnell and that
the Software in source code form remains a valuable trade secret of Bushnell. You agree not to
decompile, disassemble, modify, reverse assemble, reverse engineer or reduce to human readable
form the Software or any part thereof or create any derivative works based on the Software. You
agree not to export or re-export the Software to any country in violation of the export control laws of
the United States of America.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bushnell Onix 200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bushnell Onix 200 in the language / languages: English as an attachment in your email.

The manual is 1,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info