Manual Bury Comfort Vision 9010 (page 34 of 34) (English, German, Dutch, French, Italian, Polish, Portuguese, Spanish)

607733

Zoom out

Zoom in

1/34

3534

123564

Operation instructions

Switch-on:

Establishing aBluetooth connection (pairing):

Disconnect aBluetooth connection:

If it is not possible to establish aconnection, please check and update the software release

(firmware) of your mobile phone or of the hands-free set. Youwill find an overview dealing with

this subject in the internet under www.bury.com. In addition it is possible that you must delete all

devices connected to your mobile phone first in order to enable acorrect identification of the

hands-free set and aconnection can be established. If you have questions with regard to the

menu navigation, functions and operation of your mobile phone, please refer to the operating

guidelines of your mobile phone. Depending on the manufacturer and type, this can differ

considerably between phones.

The hands-free set has amemory for the storage of the identification of up to 5mobile phones.

In case asixth mobile phone is connected, the oldest entry in the hands-free set memory is

cancelled.

If you wish to cancel aBluetooth connection, you can either disconnect it conveniently at the

hands-free set or at your mobile phone. In addition, the connection is disconnected, if you move

too far away from the vehicle while taking your mobile phone with you and thus leave the

reception radius of the hands-free set.

After 15 minutes without an active Bluetooth connection (stand-by), the hands-free set is

switched-offautomatically if it is still supplied with power.This serves to protect the main

battery.Ifyou come back to your vehicle within that period of time you can initiate amanual

interconnection by pressing key 5for three seconds.

Insert the cigarette lighter plug of the hands-free car kit (HFCK) into the cigarette lighter jack (12

Volt) of your vehicle, if you have not realized the power supply of the HFCK otherwise. Now

establish the power supply of the HFCK (e.g. by 'ignition on'). Please press key 5for 3seconds

to activate the system. The HFCK then tries for tries for about 10 seconds to establish a

connection with the mobile phone connected last.

If you wish to establish aBluetooth connection for the first time, you have to activate the

Bluetooth function of your mobile phone and search for Bluetooth devices. In this case, search

for adevice labelled "Comfort VISION“. If several devices were identified, please select the

HFCK and enter the PIN number 1234. The Bluetooth connection (pairing) will then be

established between your mobile phone and the HFCK. The HFCK supportsthe profiles

"hands-free operation" and "OPP". Please set your mobile phone accordingly or check if these

profiles are supported.

1=leftarrow key

2=call answering key

3=volume control key -turn down

4=volume control key -turn up

5=call termination key

6=right arrow key

Please note that the capacity of your mobile phone's storage battery can quickly decrease

when the Bluetooth function is active. If you do not want to use the Bluetooth function anymore,

e.g. if you leave the vehicle for alonger period, it is recommended to deactivate this function.

Please note that some of the functions/displays specified subsequently are only possible if they

are supported by the mobile phone!

After switching on the hands-free set the main mask appears. It informs you whether amobile

phone is connected via Bluetooth or not. If yes, itsBTidentification name appears on the

display.Additionally,the field strength (the reception) is displayed as well as the storage

capacity of the mobile phone and the name of the network operator.

With the leftarrow key (key 1) and subsequently with the right arrow key (key 6) you access the

submenu structure. This consistsofthe sub-menus:

-Call lists(Dialled calls, Received calls, Missed calls),

-Phonebook,

-Bluetooth (Disconnect, SW-Update, SW-Version),

-Language,

-Pair remote control (CV 9011).

In order to call up asubmenu or afunction, please press key 2. In the first line of the display,the

respective menu category is displayed and in the middle line the current menu item is

displayed. In order to return to the superordinate menu, please press key 5. For the further

keyboard layout in the respective modi please refer to the following descriptions.

The structure of the submenu 'Call lists' is similar to the menu navigation, as you are used to it

from mobile phones. It can thus trace the numbers dialed, the calls that you have received and

the calls that you have missed.

In the submenu 'Phonebook', the first 100 memory entries of the SIM card (phonebook)

inserted in the mobile phone are displayed. The display of the hands-free set liststhe entries in

alphabetical order,itcould however contain the storage memory numbers 16, 3, 78, 45 etc. If

you have more than 100 entries (names +phone numbers) stored on your SIM card and you

want the most important of them to be displayed, you should perform arelocation. Please refer

to the operation manual of your mobile phone for details. Please note that the entries stored on

your mobile phone (addressbook) are not displayed.

Menu navigations:

Exceptions are mobile phones

transmitting datatothe HFCK via the "Object Push Profile" (OPP). The datatransmitted via this

protocol are permanently saved by the HFCK. The memory can only be deleted after the

function "software update" has been performed. It is sufficient here to call the function without

uploading an update. If the main mask appears after the "Please wait" message, please

disconnect the power supply (e.g. by removing the monitor). After re-commissioning the

memory is deleted.

In the next sub-menu 'Bluetooth' the sub item 'Disconnect' enables you to disconnect an active

Bluetooth connection from the HFCK. The HFCK then switches to the stand-by mode. In the

sub item 'SW-Update' you can replace the version of the system software (firmware) which is

transferred to the hands-free car kit by an updated version. For identifying the current firmware

of the HFCK and how to replace it, please refer to the corresponding product category on our

homepage under www.bury.com. There, the corresponding files will then be at your disposal for

download as soon as anew firmware is available.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bury Comfort Vision 9010 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 1 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bury Comfort Vision 9010 Manual

Product: