607774
32
Zoom out
Zoom in
Previous page
1/34
Next page
3732
Installation and handling of the components
Step 1:
Step 2:
Step 3:
Step 4:
First of all, please choose the most convenient position for the monitor and the installation pad
in your vehicle by attaching the monitor to the pad and checking different positions in the
vehicle. It is very important to observe impact areas for occupants (amongst others the airbag
zone), surface consistency (depending on the type of fastening), free sight to the monitor (no
impaired sight out of the windshield), removability of the monitor from the installation pad as well
as to a convenient possibility for placing the cable.
After having found a suitable position for the monitor in the vehicle you can mount / attach the
installation pad accordingly. Please use the enclosed cleaning cloth for degreasing the
surfaces you want to attach the retainer to. Please note that in case of high variations in
temperature - depending on the structure and the features - decolorizations of the surfaces can
occur during the subsequent utilization.
Connect the microphone to the left side of the monitor. If possible, please pass the cable in a
way that it does not lie or hang about unfastened in the vehicle and that it may not influence the
conducting of the vehicle.
When passing the cable, please take care that it is not under traction stress but that it has some
tolerance. Avoid crushing the cable as damages of the insulation can be caused by
friction/rubbing.
Please lay the cables in a way that they do not lie/hang unsecured in the vehicle and that they
may not influence the conducting of the vehicle. When laying a cable, please take care that it is
not under traction stress but that it has some tolerance. Avoid crushing the cable as damages of
the insulation can be caused by friction/rubbing.
Install the electronics box at a convenient place in the vehicle. This can e.g. be behind the radio,
in the glove box, or in the centre console. Please mind that you can access the connections of
the box without difficulty. Before connecting the components to the electronics box you should
branch off the battery for safety reasons. In doing so, take into account that there might be a
radio coding (confer radio manual).
The power supply of the hands-free car kit is established via a 4-core cable. Connect the black
(clamp 31 minus), the red (clamp 30 steady plus) and the blue cable (clamp 15 ignition plus) to
the power supply of your radio (where required via the cigarette lighter or the fuse box). After
connection to the counterpart, the yellow cable provides for radio muting during a phone
conversation. Please connect the white Molex connector with connection 1 (confer picture on
the next page).
ATTENTION: If you also connect the blue cable to clamp 30, the hands-free car kit will be
permanently supplied with power. If the vehicle is not running for a longer period, this could lead
to a discharge of the car battery.
Indicazioni di sicurezza
Il montaggio del sistema di navigazione può essere eseguito da voi, rispettando
le indicazioni per il montaggio del produttore dell'auto (VAS 1978). Durante
l'installazione, parcheggiare il veicolo in modo che non intralci il traffico stradale.
Consigliamo di fare effettuare il montaggio da un'officina specializzata.
Questo sistema è stato progettato per l'uso in autoveicoli con rete di bordo di 12
Volt (autovetture). Prima di installare il dispositivo in un autoveicolo con una rete
di bordo di 24 Volt (camion) usare un trasformatore di tensione. La nostra hotline
risponderà volentieri a qualsiasi domanda relativa a questo tema.
Installare i componenti del dispositivo nell'autoveicolo in modo tale che non
ostacoli la vista e che i componenti non siano montati in una zona di scontro degli
occupanti del vano accanto al guidatore o nell'area di apertura dell'airbag. Per
staccare l'abbigliamento (con e senza airbag) o i componenti del cruscotto, in
alcuni casi sono necessari attrezzi e nozioni speciali.
Non mettere in funzione il dispositivo se si nota o presume un difetto. In questo
caso contattare la nostra hotline. Riparazioni non effettuate da esperti possono
rivelarsi pericolose. Per questo motivo, ogni controllo deve essere eseguito solo
da personale qualificato.
Non rispondiamo di danni e guasti causati dall'installazione e dall'uso non
conforme del sistema. Non esporre dunque l'apparecchio all'umidità, a
temperature estreme o a scosse e seguire precisamente le fasi di lavorazione
previste nelle istruzioni di montaggio e d'uso.
Fare uso del sistema solo in situazioni consentite dalla situazione del traffico ed
in cui non si compromette la sicurezza, danneggia, mette in difficoltà o disturba
gli altri partecipanti al traffico. Il volume dell'apparecchio deve essere impostato
in modo da poter continuare a percepire i rumori esterni.
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bury CC 9051 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bury CC 9051 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 0,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bury CC 9051

Bury CC 9051 User Manual - English - 43 pages

Bury CC 9051 Additional guide - German - 1 pages

Bury CC 9051 User Manual - German, Dutch, French - 43 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info