Manual Burley Tail Wagon 2007 (page 5 of 9) (English)

632549

Zoom out

Zoom in

1/9

8 B U R L E Y T R A I L E R O W N E R ’ S I N S T R U C T I O N A N D S A F E T Y M A N U A L

B U R L E Y T R A I L E R O W N E R ’ S I N S T R U C T I O N A N D S A F E T Y M A N U A L 9

Attaching the Tongue

Tip the trailer onto its rear end and locate the two tongue receptacles on the

trailer’s left side. Remove the retaining pin from the rear tongue receptacle.

Slide the tongue all the way through both tongue receptacles. Line up the

hole on the tongue with the hole in the rear tongue receptacle. Insert the

retaining pin through both holes. Once inserted, rotate the pin’s spring clip

to engage the pin underneath the tongue receptacle. Always check to ensure

the tongue is properly installed before using the trailer.

Never operate the trailer without the retaining pin locked in place.

Unlocked tongue can loosen or detach and cause an accident resulting in

serious injury.

WARNING

Front Tongue

Mount

Rear Tongue

Mount

Trailer Pin

Hole

Installing the Safety Flag

Join the two ﬂag pole sections together. On the left rear side of the trailer,

insert the ﬂag pole through the webbing loop on the cover and down into

the ﬂag pocket on the side. DO NOT USE YOUR TRAILER WITHOUT THE

SAFETY FLAG IN PLACE.

Hitching Your Burley to Your Bicycle

The Burley standard trailer hitch was designed to quickly and safely attach

to virtually all types of bicycles. It is attached to the left rear dropout (the

non-chainring side) of your bicycle.

1. Remove the quick release lever assembly from your bike and set it aside.

2. Line up the hole on the ﬂat side of the hitch upper arm with the left rear

dropout hole.

3. Reassemble the quick release assembly through the hitch and dropout,

but don’t tighten it yet.

4. Slide the hitch receiver end of the tongue between the two hitch side

arms, and line up the holes. The hitch should clear any racks, bags, or

ﬁttings you have on your bicycle. If there is any interference, contact

your Authorized Burley Dealer.

5. Open the retaining pin and insert the pin through the holes.

6. Rotate the pin’s spring clip and close the pin.

7. Now tighten the quick release lever, with the lever pointing to the rear

of the bike. When properly adjusted, you will feel resistance halfway

through tightening the lever (when the lever is pointing straight out

away from the bike).

8. Wrap the safety strap around the inside of the chain stay twice and then

over the hitch body. Fasten the hook to the D-ring on the underside of

the tongue end.

Safety strap wrapped

around chainstay

Hook fastened to

D-ring under tongue

Hitch

Nut

Quick

Release

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Burley Tail Wagon 2007 in the language / languages: English as an attachment in your email.

The manual is 0,96 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Burley Tail Wagon 2007 Manual

Product: