632560
5
Zoom out
Zoom in
Previous page
1/8
Next page
B
A
FIGURE A: The difference between heights A & B must be less than 3/4” (19.05 mm)
Socket
Screws
Moose Rack Installation
1. Using washers and socket head screws, attach bottom of rack to
holes in bicycle dropouts.
2. Position top of rack parallel to the ground. Check distance
from stay mounting hole on Moose Rack to the bicycle’s seat
stays. FIGURE A
3. Adjust rack stays to fit. PHOTO 3
4. Temporarily attach rack stays to rack and bicycle with washers
and socket head screws (PHOTO 4), or use band clamps to attach
rack stays to seat stays (PHOTO 5).
5. If stays protrude above top of rack, excess length can be
trimmed with a hacksaw. Mark stays, then remove stays to cut.
6. Reinstall stays and tighten all nuts.
Recommended torque:
M6 Nuts: 6-8 N-m (Newton-meter)
M5 Screws: 4-5 N-m
4
Band
Clamps
5
3 Stays adjust as indicated by arrows
Rack
Stays
RACK MUST BE LEVEL. WHEN PULLING A TRAILERCYCLE, A
NON-LEVEL RACK CAN ADVERSELY AFFECT BICYCLE HANDLING,
RESULTING IN AN ACCIDENT OR SERIOUS INJURY.
WARNING
IMPORTANT
HARDWARE FOR ATTACHMENT TO BIKES WITH THREADED
EYELETS IN REAR DROPOUT IS PROVIDED. CONTACT YOUR
AUTHORIZED BURLEY DEALER BEFORE ATTEMPTING TO
MOUNT MOOSE RACK ON A BIKE WITHOUT THREADED
EYELETS IN THE REAR DROPOUT.
B U R L E Y P I C C O L O A N D K A Z O O O W N E R ’ S I N S T R U C T I O N A N D S A F E T Y M A N U A L 5
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Burley Kazoo 2008 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Burley Kazoo 2008 in the language / languages: English as an attachment in your email.

The manual is 1,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info