622485
2
Zoom out
Zoom in
Previous page
1/3
Next page
PointSafe
English | 2
Dear customer,
Thank you for buying a safe belonging to the Point Safe family. This safe was
developed and manufactured by Burg-Wächter using the latest technical
features. This Point Safe has been designed to be used in both standard and
hotel modes. In addition to the keypad this safe comes with mechanical
emergency override key.
We hope you enjoy your new BURG-WÄCHTER safe.
Important: Please read the entire User Manual before
you start programming.
Important Notes
Store your codes and emergency Override key at a secure location
and Not inside the safe (the emergency lock is located under
the 4 batteries).
For security reasons we recommend you do Not use personal numbers
for example D.O.B and Telephone numbers as your User or Master code.
If the safe is not going to be used for a prolonged period of time,
please remove the batteries.
For hotel mode: See “Point Safe in hotel mode” and the attached
guest code instructions.
For security reasons, Both the user and administrator codes should be
changed from there factory settings.
This Point safe will only reach its required security level if correctly
bolt fixed to a secure wall or floor.
(Please use the provided anchoring bolts)
For security reasons, the user code should be different from
the Master code.
Please contact your vendor if you have any questions or problems
regarding your Burg Wachter Point Safe.
General
The Point series safes can be operated both standard mode and a hotel
mode. In both of these modes, a Master code and a User code are available
to operate the safe.
The Master code must have 8 digits.
The User code can have between 3 and 6 digits.
Master Code: 12345678 (factory set)
User Code: 168 (factory set)
Technical data
Blocking times
After 3 wrong code entries for 5 minutes
Power supply
4 x MIGNON LR6 / AA / ALKALINE
Working
temperature
conditions
–15 °C to +50 °C
up to 95 % rel. air humidity
(noncondensing)
Setting up PointSafe
Remove the screw from the battery compartment side.
Move the front cover cap with the PointSafe logo to the right.
Insert the batteries (4 pieces, LR6 / AA / 1.5V / Alkaline).
The electronics will need approx. 30 sec. to load the program.
Then press the “Enter” button.
Enter the user code (168).
Press the “Enter” button again.
Now the safe can be opened and individually programmed.
Attention: If the batteries are too low, “Lo Batt” appears on the display.
All 4 batteries need to be replaced in such case (LR6 / AA / 1.5V / Alkaline).
Structure
Illustrations
Enter
Close / Clear
Set
Time
H/M
2


Need help? Post your question in this forum.

Forumrules
1

Forum

burg-wachter-point-safe

Reset search

  • Have a point safe try to open with the keys it doesn’t open Submitted on 25-5-2022 at 23:40

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Burg-Wachter Point Safe at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Burg-Wachter Point Safe in the language / languages: English as an attachment in your email.

The manual is 0,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Burg-Wachter Point Safe

Burg-Wachter Point Safe User Manual - German - 3 pages

Burg-Wachter Point Safe User Manual - Dutch - 2 pages

Burg-Wachter Point Safe User Manual - French - 3 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info