517521
3
Zoom out
Zoom in
Previous page
1/12
Next page
The oven should be positioned such that it can be loaded and unloaded easily, and the
controls can be operated conveniently.
Important:
DO NOT OBSTRUCT THE VENTILATION VENT IN THE TOP, OR THE VENTILATION
SLOTS IN THE RIGHT HAND SIDE, REAR AND BASE OF THE OVEN.
Electrical Connection:
Fitting a plug
The mains lead of this oven will already be tted with a BS1363 13A plug. If the fuse has to
be replaced, use a 13 amp fuse complying with BS 1362.
If the plug is not suitable for your socket then the plug must be cut off and disposed of safely.
An appropriate plug should be tted as follows:
IMPORTANT: The wires in the mains lead are coloured in accordance with the following
code:
Green and Yellow - Earth
Blue - Neutral
Brown - Live
The wire which is coloured green and yellow must be connected to the terminal in the plug
which is marked with the letter E or the earth symbol or coloured green or green and yellow.
The wire which is coloured blue must be connected to the terminal which is marked with the
letter N or coloured black or blue.
The wire which is coloured brown must be connected to the terminal which is marked with
the letter L or coloured red or brown.
Make sure that the connections are tight and that there are no loose strands of wire and no
insulation trapped under the terminals. Tighten the clamp in the plug making sure that it grips
the outer covering of the cord. If tting a BS 1363 13A fused plug then t a 13A fuse. Tighten
the plug cover securely. If you are in any doubt, consult a qualied electrician.
IMPORTANT: if the supply cord is damaged, it must be replaced by the manufacturer,
service agent or similar qualied person in order to avoid a hazard.
WARNING - THIS APPLIANCE MUST BE EARTHED
In addition to the earth within the mains plug, connect the equipotential bonding
terminal on the rear panel.
Electrical connection: 230V ~ 50Hz, 12A, 2850W
Before Use:
Operate the oven for approximately 30 minutes at the highest temperature, to remove any
fumes or odour which may be emitted - this is due to oil used during manufacture, but is
not harmful.
800
580
600
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Burco CTCO01 SKU 444440542 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Burco CTCO01 SKU 444440542 in the language / languages: English as an attachment in your email.

The manual is 1,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info