779921
100
Zoom out
Zoom in
Previous page
1/102
Next page
MY20B02-22_1.0_28.05.2019 100
Glossary
Fork steerer
Source: EN 15194:2017: part of a fork that rotates
about the steering axis of a bicycle frame head
tube. It is normally connected to the fork crown or
directly to the fork legs, and is normally the point
of connection between the fork and the handlebar
stem.
Suspension fork
Source: EN 15194:2017: front fork incorporating
controlled, axial flexibility to reduce the
transmission of road-shocks to the rider
Suspension frame
Source: EN 15194:2017: frame incorporating
controlled, vertical flexibility to reduce the
transmission of road-shocks to the rider
Mountain bike
Source: EN-ISO 4210-2: bicycle designed for use
off-road on rough terrain, on public roads, and on
public pathways, equipped with a suitably
strengthened frame and other components, and,
typically, with wide-section tyres with coarse tread
patterns and a wide range of transmission gears.
Weight of ready-to-ride bicycle
Source: ZEG: the indicated weight for a ready-to-
ride bicycle refers to the weight of a pedelec at the
time of sale. The weight of each additional
accessory must be added to this weight.
Permitted total weight
Source: EN 15194:2017: weight of the fully
assembled pedelec plus the rider and baggage,
as specified by the manufacturer
Young adult bicycle
Source: EN-ISO 4210-2: bicycle designed for use
on public roads by a young adult whose weight is
less than 40 kg, with maximum saddle height of
635 mm or more and less than 750 mm. (see ISO
4210)
Cargo bike
Source: DIN 79010: bicycle mainly designed to
carry goods.
Wheel
Source: EN 15194:2017: assembly or
combination of hub, spokes or disc, and rim, but
excluding tyre assembly
Minimum insertion depth mark
Source: EN 15194:2017: mark indicating the
minimum insertion-depth of handlebar stem into
fork steerer (fork stem) or seat post into frame
Maximum continuous power
Source: ZEG: the maximum continuous power is
the maximum power for the electric motor output
shaft during 30 minutes.
Maximum saddle height
Source: EN 15194:2017: vertical distance from
the ground to the point where the top of the seat
surface is intersected by the seat-post axis,
measured with the saddle in a horizontal position
and with the seat-post set to the minimum
insertion-depth mark
Maximum tyre pressure
Source: EN 15194:2017: maximum tyre pressure
recommended by the tyre or rim manufacturer for
a safe and efficient performance. If the rim and
tyre both indicate a maximum tyre pressure, the
maximum inflation pressure is the lower of the two
pressures indicated.
Model year
Source: ZEG: the model year refers to the first
production year that the series-manufactured
pedelec was manufactured in the version in
question and is not always identical with the year
of manufacture. The year of manufacture may be
before the model year in some cases. If no
technical modifications are introduced to the
series, production may continue of pedelecs from
a previous model year.
Racing bicycle
Source: EN-ISO 4210-2: bicycle intended for high-
speed amateur use on public roads having a
steering assembly with multiple grip positions
allowing for an aerodynamic posture, a multi-
speed transmission system, tyre width not greater
100


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bulls Cross Mover Evo - Brose Topology 2020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bulls Cross Mover Evo - Brose Topology 2020 in the language / languages: English as an attachment in your email.

The manual is 11.52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bulls Cross Mover Evo - Brose Topology 2020

Bulls Cross Mover Evo - Brose Topology 2020 User Manual - German - 104 pages

Bulls Cross Mover Evo - Brose Topology 2020 User Manual - Dutch - 101 pages

Bulls Cross Mover Evo - Brose Topology 2020 User Manual - French - 100 pages

Bulls Cross Mover Evo - Brose Topology 2020 User Manual - Italian - 103 pages

Bulls Cross Mover Evo - Brose Topology 2020 User Manual - Spanish - 104 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info