497312

Bullit DVD7200BT Manual

28
Zoom out
Zoom in
Previous page
1/48
Next page
Page 25 of 44 pages
DVD7200BT ENGLISH
position of “8” on one of the two sides, the speaker group on the opposite side will be muted.
To change this, turn the volume control dial again.
The setting is saved either when the desired value is confirmed by pressing the volume
control dial or through automatic storage (don’t change anything on the device for approx.
five seconds). If you confirm the selection by pressing the volume control dial, you will reach
the next possible setting. If you use the automatic memory, the device will return to the
standard display.
Changing the volume distribution (FADER)
After pressing the volume control dial four times, the settings for the speaker distribution
between the front and rear speaker group (FADER) will be reached. The message “FAD” will
appear on the display along with the set volume ratio between the front and rear speaker
group (e.g. “FAD 2F”). To change the ratio between the speaker groups, turn the volume
control dial clockwise or counter-clockwise. Depending on the direction in which the volume
control dial is turned, an “R” or an “F” will appear on the display, together with a digit (e.g.
“F2” or “R3”). These provide information about the direction in which the volume ratio is
changed and about the amount of the change. The ratio between the right and left speaker
group can be set in a range between “F8” and “R8”. The volume ratio between the speakers
changes according to the setting. The volume of one speaker group increases, the other
decreases. If the ratio is set to “R-F”, the volume on both speaker groups is the same. If the
control dial for one of the two speaker groups is turned to the maximum setting “8”, the other
speaker group is muted. To change this, turn the volume control dial again.
The setting is saved either when the desired value is confirmed by pressing the volume
control dial or through automatic memory (don’t change anything on the device for approx.
five seconds). If you confirm the selection by pressing the volume control dial, you will return
to the standard display. If you use the automatic memory, the device will return to the
standard display.
Note:
If you press the volume control dial again after you reach the last settings option (here
FADER), you will return to the standard display. If no changes are made for five seconds, the
device will automatically return to the initial display. In DVD mode (with an open monitor), the
settings option FADER is also followed by the functions BRIGHT, CONTRAST, COLOR and
SHARP.
Menu settings level 2
You can reach menu level 2 by pressing the volume control dial for approx. two seconds.
The individual menu items can be reached by repeatedly pressing the control dial. At menu
level 2, the functions “LOC” (distance setting for station search), “LOUD” (sound setting),
“ST-MO” (switching between stereo and mono playback), “CT” (set time of day), “TAVOL”
(standard volume for traffic announcements), “EON” (automatic station switch for traffic
announcements), “D/Z” (setting of the second playback level - DUAL ZONE) can be set.
When the monitor is open, the functions referred to above are available to you under the
following alternate terms: ST-MO = STMO, CT = TIME, TAVOL = TA VOL.
LOC function to set the station search
The “LOCAL” function is relevant for the station search. Here it can be selected whether only
local, strong stations (“ON”) or also weaker, more distant stations (“OFF”) are searched for.
The “LOC” function prevents a corresponding switching to a stronger station as long as it
isn’t broadcasting the same program as the one currently being listened to. To activate the
“LOC” function, press the volume control dial until menu level 2 is reached. The “LOC”
function will appear. Now you have the option of activating (“LOC ON”) or deactivating (“LOC
… 28 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bullit DVD7200BT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bullit DVD7200BT in the language / languages: English as an attachment in your email.

The manual is 1,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info