497312
23
Zoom out
Zoom in
Previous page
1/48
Next page
Page 20 of 44 pages
DVD7200BT ENGLISH
- The “AF” function is activated when the device is shipped.
- In an area with bad reception, attempts to change between alternative frequencies
can be heard as disruptive pauses. In such an event, the “AF” function can be turned
off.
Radio reception conditions
In the FM wave band, there can be changes in the reception conditions during the drive.
Mountains, buildings or bridges can diminish reception. This applies especially if the distance
to the station is large.
Enhanced Other Networks (EON)
The “EON” function is an additional RDS service. If the current program doesn’t offer any
traffic announcements, EON automatically switches to the traffic announcements on another
program. After the end of the announcement, the device switches back to the previously
heard station. The readiness for traffic announcements “TA” has to be activated for this. To
turn the EON function on or off, please switch to the RDS menu.
Regional programs (“REG“)
Some radio stations divide their programs into regional programs with different content at
specific times. If the reception is getting worse, the “REG” function prevents the car radio
from changing to alternative frequencies that have different program contents. To turn the
“REG” function on or off, please keep the “AF/REG” button pressed until "REG-ON" or "REG-
OFF" appears in the display.
CD/DVD mode
The DVD7200BT supports the formats DVD, DVD-R, DVD-RW, DVD+R, DVD+RW, DVD-R
DL, DVD+R DL, CD, CD-R, CD-RW, VCD, SVCD, MP3, WMA, OGG Vorbis and JPG image
CD. The minimum bitrates of WMA and MP3 files are at 32 kbps and for OGG files at 45
kbps. The maximum bitrates of WMA files is at 192 kbps, MP3 files at 320 kbps, and OGG
files at 500 kbps.
Note:
- Conditional on the quality differences of the media as well the characteristics of the
recording, it can happen that some individually recorded CDs and DVDs are
incapable of being read. Such events do not constitute a malfunction of the device.
- Audio CDs (CD-R and CD-RW) that are recorded individually have to be finalized at
the end of the burning process.
- Note that the file names of the audio tracks have to correspond to the ISO-9660
standard. During the playback of MP3 CDs, individual tracks can be skipped or not
played back correctly. This can be due to the respective disc configuration, the
decoder software, or the hardware that was used for the recording.
- Copy-protected CDs do not correspond to the specifications of audio CDs (CD-DA),
don’t carry the respective logo, and can therefore cause playback errors.
- If a selected function is unavailable, a hand
1 symbol will appear in the upper left of
the display.
Selecting a CD/DVD as the program source
To play a CD/DVD, turn on the device with the on/off button. If the device was turned off
during CD/DVD operation, the playback begins at the track heard before turning off the
device. If the device is set to another program source, press the “MODE” button until “DVD”
appears in the display. The display will indicate the message “LOADING”. When the monitor
is open, the screen menu is also available for the selection of the program source. The
program source “DVD” can only be selected through the “MODE” button if there is a CD or
DVD in the insertion slot.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bullit DVD7200BT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bullit DVD7200BT in the language / languages: English as an attachment in your email.

The manual is 1,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info