497312
20
Zoom out
Zoom in
Previous page
1/48
Next page
Page 17 of 44 pages
DVD7200BT ENGLISH
Muting the speakers
To mute the connected speakers, briefly press the “MUTE” button. “MUTE” will appear on the
display. To return to the original volume, press the “MUTE” button again briefly or turn the
volume control dial. The message “MUTE” will turn off and the volume will be at the same
level as before it was muted. The MUTE setting also affects the LINE outputs and disrupts
these until the function is deactivated again.
Selection of the radio station
Turn on the DVD7200BT CD/DVD car radio with the on/off button. If the device was turned
off while it was in RADIO mode, the last selected station will be heard. If the device is set to
an operation with one of the different data carriers, please press the “MODE” button until you
get to the radio function.
Radio Display with open monitor Radio display with open monitor with
activated Dual Zone
Selection of the wavelength range
FM (UKW) range: To select the FM range, briefly press the “BAND” button repeatedly until
the desired range "F1“, “F2“, or “F3“ (with a closed monitor) or "FM 1“, “FM 2“, or “FM 3“ (with
an open monitor) appear on the display along with the current frequency.
MW range: To select the MW range, briefly press the “BAND” button repeatedly until “M1” or
“M2” (with a closed monitor) or “MW 1” or “MW 2” (with an open monitor) appear on the
display along with the current frequency.
Note: After selecting a range, the station last selected in this range will be heard. When the
monitor is open, the “BAND” button on the screen is also available for the selection of the
wavelength range.
Searching for a radio station with the scanner
To set the stations, select the desired wave band with the “BAND” button. In order to begin
searching in the desired direction, briefly press the five-way multifunction button. Press the
button towards the left to diminish the search frequency or to the right to increase the search
frequency. The scanner will stop at the next available station. When the monitor is open, the
buttons
and on the on-screen keyboard are also available to change the frequency.
Manual search for a radio station
In order to select a station manually, press the five-way multifunction button for about three
seconds towards the right or left. The display will indicate “MANUAL”. Now press the five-
way multifunction button towards the right to increase the frequency, or to the left to diminish
the frequency until the desired frequency is indicated on the display. The frequency will
change in 50kHz increments in the FM range. If there is no entry for about seven seconds,
the device will switch back to automatic station search. The display will indicate “AUTO”.
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bullit DVD7200BT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bullit DVD7200BT in the language / languages: English as an attachment in your email.

The manual is 1,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info