650296
2
Zoom out
Zoom in
Previous page
1/2
Next page
Answering machine
Your answering machine is on and ready to record messages. The controls are shown
in the base diagram to the bottom left and the features can also be accessed via the
handset
Ans.
Machine
menu.
Recording your own outgoing message
Press the
left soft key, display shows
Ans Machine
and press OK.
Press
to scroll to
Ans Settings
and press OK.
Press
to scroll to
Outgoing Message
and press OK.
Press
to to select either
Ans
&
Rec
or
Answer
Only
and press OK.
Press
to scroll to
Recording
MSG
and press OK to record your message.
When prompted, speak your message into the handset. When nished press OK.
Your message will be played back to you.
For detailed instructions on all the answering machine features see the full
user guide online at www.bt.com/producthelp
3 Go!
Set time and date
Press left soft key (the left-hand button) to open main menu.
Press
to scroll to
HS SETTINGS
and press
OK
soft key.
DATE & TIME
is displayed, press
OK
soft key.
Press
to
SET
TIME
and press
OK
soft key. Enter 2 digits for the hour and 2 for the
minute using the 24hr format and press
OK
soft key. You will hear a conrmation tone.
Press
,
SET DATE
is displayed. Press
OK
. Enter the day, month and year using the
dd-mm-yy format and press
OK
. You will hear a conrmation tone.
Making calls
Press then dial the phone number. Press to end the call.
Answering calls
If you have subscribed to Caller Display, the caller’s details will be displayed before you
answer (see the full user guide online at www.bt.com/producthelp for details).
Lift the handset from the base or charger to answer incoming calls. If the handset is
not on the base or charger, press
.
Handsfree
Press
during a call to switch the call to loudspeaker.
Secrecy (Mute)
Press the
C
soft key during a call to activate secrecy mode. Press the
C
soft key again to
resume your call.
Redial
Press
. Press or to scroll through the list.
Press
to redial the number displayed.
Directory
Storing new directory entries
Press . The rst entry (or
LIST EMPTY
) is displayed.
Press the
left soft key,
ADD
is displayed. press OK.
NAME
is displayed. Using the letters
on the keypad, enter the name, then press OK. You may need to press the same button
a few times until the letter you want is displayed. For example, press once for
A
,or
twice for
B
.
NUMBER
is displayed, enter the phone number for the entry and press OK.
Press
or to select a ringtone to associate with the entry and press OK to conrm.
Press to return to standby.
Dialling a directory entry
Press
. Scroll or to the entry you want. Press to dial.
Caller Display and the Calls list
You must subscribe to a Caller Display service for this feature to work. Your network
provider may charge you for this service.
View and dial from the Calls list
Press
, then or to scroll through the last 40 incoming calls.
Press
or to dial the number displayed.
Find out more
New Frequently Asked Questions available at www.bt.com/producthelp
If you need more detailed instructions, a full user guide is available to
download from www.bt.com/producthelp
If you cannot nd the answer to your problem in the full online user guide,
then please email bt.helpdesk@vtecheurope.com
Call the Helpline on 0800 218 2182
*
Your phone
Handset
Base
Help
Most problems can be xed with a few simple checks.
Problem Solution
No dial tone Only use the cables and batteries supplied.
Make sure both the mains power adaptor cable and
telephone line cord are plugged into the correct sockets.
Poor speech quality Make sure the product is not located too close to other
electrical appliances. This can also help improve the
handset range from the base.
Battery icon not full/
handset dead
Make sure you charge the batteries for 16 hours before use
to ensure maximum battery performance.
Using broadband on the same
phone line?
Make sure you plug the phone
into the wall socket via an ADSL
microlter (not supplied), otherwise
you may have problems with this
product and your broadband service.
ADSL
microlter
Press to make and receive
phone calls.
Press to display the Redial
list and to move down
menu options.
Press to display the Calls
list and to move up
menu options.
Press to end the call
in progress.
Used when connected to a
switchboard/PBX.
Press to activate handsfree.
Press to open the directory.
Adjust speaker volume
during playback.
Repeat current message. Skip forward during
message playback.
Switch answering
machine on/off.
Message display
showing number of
messages and answering
machine status.
Play messages. Delete messages
during playback.
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BT Freelance XD7500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BT Freelance XD7500 in the language / languages: English as an attachment in your email.

The manual is 0,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of BT Freelance XD7500

BT Freelance XD7500 User Manual - English - 58 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info