Manual BT Decor 210 (page 2 of 2) (English)

648661

Zoom out

Zoom in

1/2

To dial a number in

the Quickdial memory

Lift the handset and wait for

the dial tone.

Press the QUICKDIAL button.

Enter the memory location

number between 0 and 9,

under which the number is

stored. The number is

displayed and dialled

automatically.

To delete stored

numbers

Lift the handset.

Press the STORE button.

Enter the memory location

number (0-9) or (M1,M2,M3)

under which you have stored

the number you wish to delete.

Press the STORE button. You

will hear a confirmation tone.

Replace the handset.

Alternatively, any existing

number stored in the

One-Touch or Quickdial

memories can be overwritten

by entering a new number

under the same memory

location. Simply follow the

instructions under the storing

numbers sections previously

shown.

Note

If any error occurs in the

storing mode you will hear

three short beeps, then the

product will return to talk

mode.

If you unplug your BT Decor 210

the numbers stored in the

memory will be saved. However,

the last number redial memory

will be lost.

Note

There is a Quickdial memory

label included on the reverse

side of your handset and a

One-Touch memory label on

the base unit. You can use

these labels to keep a record of

which memory location

number you have used for each

telephone number.

Note

You can mix manual and

memory dialling as required,

for example, you can dial the

area code 020 8304 from the

memory and then complete the

number manually.

General information

Technical information

How many telephones can

you have?

All items of telephone

equipment have a Ringer

Equivalence Number (REN),

which is used to calculate the

number of items which may

be connected to any one

telephone line. Your

BT Decor 210 has a REN of 1.

A total REN of 4 is allowed, if

the total REN of 4 is

exceeded, the telephones may

not ring. With different

telephone types there is no

guarantee of ringing, even

when the REN is less than 4.

R&TTE Directive

Hereby, Suncorp

Technologies Ltd, declares

that this BT Decor 210 is in

compliance with the essential

requirements and other

relevant provisions of

Directive 1999/5/EC.

The Declaration of

Conformance for the

BT Decor 210 is published on

the website

http://www.suncorptech.com/bt

Switchboard

compatibility

This product is intended for

use within the UK for

connection to the public

telephone network and

compatible switchboards,

which support tone dialling

and time break recall. If in

doubt please consult your

service provider.

Wall

mounting

1. Locate lugs and mount into

holes under base unit as

shown.

2. Swing mount down to clip

into top hole.

3. Drill 2 holes, 25mm deep

using a 3mm drill, for the

screws using the template.

Ensure that you do not drill

into any hidden wiring or

pipes. Insert the wall plugs

provided and then insert a

screw into each hole. Leave

2-3mm between the head of

the screw and the wall.

4. Position the product onto

the screws.

5. Drop down to secure.

9 10

69mm

BT Decor 210 ~ Issue 2 ~ 1st Edition ~ 27th August ’02 ~ 5597

Offices worldwide

The telecommunications services described in

this publication are subject to availability and may be modified

from time to time. Services and equipment are provided subject

to British Telecommunications plc’s respective standard

conditions of contract. Nothing in this publication forms any part

of any contract.

Registered Office: 81 Newgate Street, London EC1A 7AJ.

Registered in England No. 1800000.

BT Decor 210 Issue 2 (8/03) 1

Printed in China.

Visit us at www.bt.com

This product is intended

for connection to analogue public switched telephone

networks and private switchboards

in the United Kingdom.

BT Decor 210

CORDED TELEPHONE

Guarantee

Your BT Decor 210 is

guaranteed for a period of

12 months from the date of

purchase.

Subject to the terms listed

below the guarantee will

provide for the repair of, or at

BT’s or its agent’s discretion

the option to replace the BT

Decor 210, or any component

thereof, which is identified as

faulty or below standard, or

fails as a result of inferior

workmanship or materials.

Products over 28 days old from

the date of purchase may be

replaced with a refurbished

or repaired product.

The conditions of this

guarantee are:

• The guarantee shall only

apply to defects that occur

within the 12 month

guarantee period.

• Proof of purchase is

provided.

• The equipment is returned

to the point of purchase.

• This guarantee does not

cover any faults or defects

caused by accidents, misuse,

fair wear and tear, neglect,

tampering with the

equipment, or any attempt

at adjustment or repair other

than by approved agents.

• This guarantee does not

affect your statutory rights.

Within the 12 month

guarantee period:

In the unlikely event of a

defect occurring, please return

the product, with the receipt,

to the place of purchase.

Outside of the 12 month

guarantee period:

If your product needs repair

after the guarantee period has

ended, the repair must meet

the approval requirements for

connection to the telephone

network. We recommend that

you contact BT’s approved

repair agent, TecLogic on

01672 564444 or a local

qualified repairer.

If you have to return

your BT Decor 210

Pack the unit securely,

preferably in the original

packaging. All parts must be

returned. We cannot take

responsibility for goods

damaged in transit.

BT Accessories and

Replacement Items

For a full range of

accessories and replacement

items for BT products please

call 0870 240 5522, or visit:

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of BT Decor 210 in the language / languages: English as an attachment in your email.

The manual is 0,11 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

BT Decor 210 Manual

Product: