648647

BT Converse 2200 Manual

5
Zoom out
Zoom in
Previous page
1/18
Next page
If you experience any problems, please visit bt.com/producthelp
5
WARNING
Do not place your BT Converse 2200 in the
bathroom or other humid areas.
Other electrical equipment close to your
Converse could have an adverse effect on call
quality. If you experience buzzing during a call
try moving the Converse away from any electrical
equipment that may be nearby.
Location
You need to place your BT Converse 2200 within 3 metres of a telephone socket
so that the cable will reach. Your BT Converse 2200 can be wall mounted,
see ‘Wall mounting your phone’ on page 17.
Setting up
1. Plug the end of the telephone line cord into the telephone wall socket.
2. Check that the Dialling Mode switch on the underside of the base is set to
TB for tone dialling with timed break recall.
Desk mounting plinth
If you want to remove the desk mounting plinth, push it in the same direction as the
two arrows shown on the plinth. To refit the desk mounting plinth, insert the two lugs
on the plinth into the base and push it down into place, as shown by the blue arrows.
Your BT Converse 2200 is now ready for use.
Getting started
IMPORTANT
Only use the handset and line cord supplied or
this product may not work.
Using broadband on the same phone line?
To avoid problems with your broadband or
noise on your phone line, you might need to
plug it into the wall socket via a microfilter
(not supplied).
If your main phone socket
has a single socket, as
shown, you’ll need to use
microfilters.
You don’t need to use
microfilters if your main
phone socket has two
separate sockets, like these:
Dialling mode
If connecting to a switchboard you may need to
adjust the dialling mode setting to P or T using
the Mode switch on the underside of the base.
If in doubt, please consult your service provider.
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BT Converse 2200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BT Converse 2200 in the language / languages: English as an attachment in your email.

The manual is 2,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info