650202

BT BT2000 Manual

2
Zoom out
Zoom in
Previous page
1/2
Next page
Handset ringer melody and volume
Set the handset ringtone for external or internal calls
Select Menu, scroll
Vol.
Calls
to
Settings
and select .
Sounds
is displayed, press .
Ringing
is displayed, press .
External
Ringtone
is displayed, press .
Or, press to display
Internal
Ringtone
and then press .
The current ringtone will be played.
Press
Vol.
Calls
or
Vol.
Calls
to hear the different ringtones and press to save your choice.
Saved
will be displayed and you will hear a confirmation tone.
Set the handset ringer volume
Select Menu, scroll
to
Settings
and press .
Sounds
is displayed, press .
Ringing
is displayed, press .
Press until
Ringing
Volume
is displayed and press .
Press
Vol.
Calls
or
Vol.
Calls
to hear the different volume levels and press to save your
choice.
Saved
will be displayed and you will hear a confirmation tone.
Incoming speech volume
During a call, press
Vol.
Calls
or
Vol.
Calls
to increase or decrease the volume. The first press will
show the call volume screen so you can see the current volume level. Subsequent
presses will change the volume, you will hear the volume level with each press.
3 Go!
Making calls
Press then dial the phone number. Press to end the call.
Answering calls
If you have subscribed to Caller Display, the caller’s details will be displayed before
you answer (see below and also the full user guide online at bt.com/producthelp
for details).
Lift the handset from the base or charger to answer incoming calls. If the handset is not
on the base or charger, press
.
Mute
Select Mute by pressing the right option button during a call if you want to prevent the
caller hearing anything from your end. Select Unmute to return to your caller.
Contacts
Storing new contacts (up to 50)
From the home screen, press .
Select Options by pressing .
Add
new
contact
is displayed, press .
Enter the name using the letters on the keypad and press . You may need to
press the same button a few times until the letter you want is displayed, for example,
press
once for A, or twice for B.
Enter the phone number and press to save. If you make a mistake, press
to delete the last digit or letter entered.
If you have more than one handset registered to the base you will be prompted to
Copy
to
other
handsets?
If you wish to, press and follow the instructions.
Dialling a contact
From the home screen, press . Scroll or to display the entry you want and
press to dial.
Or, search alphabetically using the keypad to enter the first letter of the name you want
then scroll or to the exact entry and press to dial.
Speed dial
Saving a speed dial entry
From standby, enter the phone number you want to store. Press and hold the speed
dial button you want to store the number under (choose from buttons 2 to 9).
Saved
as
speed
dial
x
is displayed (x being the speed dial button) and you will hear a
confirmation tone.
Dialling a speed dial entry
Press and hold the speed dial button
to under which the entry is stored.
The number is dialled automatically.
Caller Display and the Calls list
You must subscribe to a Caller Display service for this feature to work. Your network
provider may charge you for this service.
View and dial from the calls list (up to 50 incoming calls and 20 outgoing calls)
The number of new calls will be shown on the home screen when incoming calls have
been missed e.g.
3
new
calls
. You can clear the notification by viewing the calls list on
any handset registered to the base. The
will show for missed calls, will show for
outgoing calls or will show for incoming calls so that you can differentiate between
the types of calls in the calls list.
Press
, then or to scroll through and view the list. To dial an entry, press
when the entry is highlighted.
Save a Calls list entry to your contacts
Press
, then scroll or to the entry you want and press .
Save
number
is displayed, press .
Enter a name using the keypad and press . The number is displayed, press
to confirm..
Your phone
Handset
ADSL
microfilter
Find out more
• Frequently Asked Questions are available at bt.com/producthelp
•
If you’d like detailed instructions, a full user guide is available to
download from bt.com/producthelp
•
If you cannot find the answer to your problem in the full online user guide,
then please call our free Helpline on 0800 145 6789*. Our dedicated
advisors are more likely to be able to help you than the retailer where you
made your purchase.
•
This document is also available in other formats, such as Large print, Braille
and Audio CD. If you would like a copy, please call 0800 145 6789*.
Help
Most problems can be fixed with a few simple checks.
Problem Solution
No dial tone or line cord error
message displayed on-screen
Only use the cables and batteries supplied.
Make sure both the mains power adaptor cable and
telephone line cord are plugged into the correct sockets.
Poor speech quality Make sure the product is not located too close to other
electrical appliances. This can also help improve the
handset range from the base.
Battery icon flashing
and Battery low
displayed on screen
The battery charge is very low. Make sure you charge the
batteries for 24 hours before use to ensure maximum
battery performance.
Using broadband on the same
phone line?
Make sure you plug the phone
into the wall socket via an ADSL
microfilter (not supplied), otherwise
you may have problems with this
product and your broadband service.
If you use BT Infinity, you will not need to use an ADSL microfilter.
For other types of broadband, please check with your
provider if a microfilter is required.
Battery
Low
Left option button
Press to enter the main menu,
access sub menus and confirm
options shown on the display
above the button.
Move up through menu options.
Increase volume.
Access your stored Contacts.
In standby mode
make/receive phone calls.
In talk mode switch handsfree on/off.
Enter Calls list, decrease incoming
speech volume and move down
through menu options.
In standby, press and hold to
dial BT 1571 or your stored
speed dial number.
Right option button
Press to confirm the option
displayed on the screen above the
button, to delete or go back to the
previous screen.
Turn eco mode on/off.
R (Recall) used when connected to
a switchboard/PBX and with some
BT Calling Features.
End a call.
Press and hold to turn handset on/off.
to Speed dial buttons
In standby, press and hold to dial a
stored speed dial number.
Press and hold to turn the ringer
on or off.
Press and hold to lock/unlock keypad.
Toggle between upper and lower
case characters.
Finding your way around your phone
Your BT2000 handset has an easy to use menu system. Each menu has a list of options.
When the handset is switched on and at the home screen:
Select Menu by pressing the Left option button
to open the main menu.
Use the
or button to scroll through the available menu options.
When the menu you want is displayed, press the Left option button .
Use the or button to scroll through the available sub menu options.
When the sub menu you want is displayed, press the Left option button .
Select Back by pressing the Right option button .
To exit a menu and return to the home screen, press .
If no buttons are pressed for 30 seconds, the handset returns to the home
screen automatically.
Left option button Right option button
Navigation buttons
Scroll up or down through
the menu options.
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BT BT2000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BT BT2000 in the language / languages: English as an attachment in your email.

The manual is 0,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of BT BT2000

BT BT2000 User Manual - English - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info