666580

Bruder Mannesmann 12330 Manual

1
Zoom out
Zoom in
Previous page
1/5
Next page
Finishing Sander
item-no. 12330
CE
This tool is interference-suppressed
according to
CE EN 55014 + EN 61000
I N S T R U C T I O N - M A N U A L
Before using electric power-tools, please read and
understand the attached safety-instructions!
Additional safety-hints for impact-drill:
• Always wear safety-goggles and a dust-mask
during your work with the finishing-sander.
• Always secure the workpiece by clamps or else to
avoid slipping away.
• Make sure, that there are no nails, screws or other
metal-parts in your workpiece, before starting your
job.
• Always keep the holes in the baseplate clean from
dust.
• Always connect a vacuum cleaner to the attached
adaptor during your work.
Description
1. front-handle
2. on-/off-switch
3. lock button
4. handle
5. sanding paper
6. base plate
7. paper clamp
8. adaptor for vacuum-cleaner
9. power cord
Technichal dates
voltage 230 V AC∼ / 50 Hz
power input 150 W
sanding area 187 x 90 mm
sandpaper-size 230 x 90 mm
no. of vibrations 10.000 min
-1
sound pressure level (LPA) 80,0 dB(A)
sound power level (LWA) 93,0 dB(A)
vibration 2,5 m/s²
(acc. to EN 50144/13)
protection class / II
weight 1,29 kgs
Always wear safety-goggles, dust-mask and ear-
protection, when machine is in use!
Recommended nominal operating time: approx. 20
minutes under permanent load.
Rest after permanent operation: approx. 5-10
minutes.
Fastening of sanding-paper
• Disconnect the tool from the power-supply
before changing sanding paper.
• Open the paper-clamps on both sides of the
base-plate and remove the worn-out sanding-
paper.
• Place a new sanding-paper on the base-plate
observing the holes in the sanding-paper fit to
the holes of the base-plate.
• Bend the paper to the base-plate and fasten one
clamp first. Press the sanding-paper against the
base-plate, bend the other end and fasten
second clamp.
• Attention: This finishing sander is not suit-
able for wet-sanding jobs.
Operation
• To start the sander pull the trigger upwards
• For continious operation press the lock-button at
the same time.
• To stop the machine, pull the trigger again and
release.
• Put the sander on the workpiece, as soon as the
motor has reached its maximum speed.
• Let the sander slide smoothly over the surface of
your workpiece and do not apply too much
pressure. This will lead to reduce the speed, to
increase the wear of the sanding-paper and the
motor and to an uneven surface.
• Stop the sander only after having lifted from the
workpiece.
• Do not use the sander without sanding-paper.
• Do not cover the ventilation-slots by your hands,
in order to achieve adequate cooling of the
motor.
Maintenance
• The sander has no need to be maintained.
• Before cleaning the sander, be sure to
disconnect the machine from the power-supply.
• Only use a dry brush or cloth for cleaning the
housing from sanding-dust.
• Do not use any detergents, since they will attack
the plastic-housing and do not let any liquids
enter the inside of the machine.
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bruder Mannesmann 12330 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bruder Mannesmann 12330 in the language / languages: English, German as an attachment in your email.

The manual is 0,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info