Manual Brother XL-5030 (page 5 of 82) (English, Italian, Spanish)

631388

Zoom out

Zoom in

1/82

IMPORTANT

If the available socket outlet is not suitable for the plug

supplied with this equipment, it should be cut off and

an appropriate three pin plug fitted. With alternative

plugs an approved fuse must be fitted in the plug.

NOTE: The plug severed from the main leads must

be destroyed as a plug with bared flexible cords is

hazardous if engaged in a live socket outlet. In the

event of replacing the plug fuse, use a fuse approved

by ASTA to BS 1362, i.e. carrying the

ASA

mark,

rating as marked on plug.

Always replace the fuse cover. Never use plugs with

the fuse cover removed.

WARNING: DO NOT CONNECT EITHER WIRE TO

THE EARTH TERMINAL WHICH IS MARKED WITH

THE LETTER ‘E’, BY THE EARTH SYMBOL

OR COLOURED GREEN OR YELLOW.

The wires in these main leads are coloured in ac-

cordance with the following code:

Blue Neutral

Brown Live

As the colours of the wiring in the main lead of this

appliance may not correspond with the coloured

markings identifying the terminals in your plug, pro-

ceed as follows:

The wire which is coloured blue must be connected

to the terminal which is marked with the letter ‘N’ or

coloured black or blue.

The wire which is coloured brown must be connected

to the terminal which is marked with the letter ‘L’ or

coloured red or brown.

FOR USERS IN THE UK, EIRE, MALTA AND CYPRUS ONLY.

If your sewing machine is fitted with a 3 pin non-rewireable BS plug then please read the following.

1. Connect the three-prong plug into the machine.

2. Connect the electrical supply plug into a wall

outlet.

- When leaving the sewing machine unattended,

the main switch of the machine must be switched

off or the plug must be removed from the socket

outlet.

Turn on or off the switch for the main power and sew-

light.

1 Turn on

2 Turn off

- When servicing the sewing machine, or when

removing covers or changing lamps, the ma-

chine or the electrical set must be disconnected

from the supply by removing the plug from the

socket outlet.

Connecting Plugs and Main Power / Sewing Light Switch

I'm a complete notice, and need your help.
I was using my sewing machine and the unit that holds the needle came off the main rod that moves up and down.. There seems to be a tiny alan screw, is that what holds it on the rod? Would need a tiny alan key..

Thank you for any help..
Kind regards
Helen Submitted on 10-10-2020 at 20:19
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Brother XL-5030 in the language / languages: English, Italian, Spanish as an attachment in your email.

The manual is 1,53 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother XL-5030

Brother XL-5030 User Manual - German, Dutch, French - 85 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Brother XL-5030 Manual

Product: