458334
60
Zoom out
Zoom in
Previous page
1/63
Next page
59
6
The fabric is
wrinkled.
You have not threaded the upper
thread properly or fitted the bobbin
properly.
Thread the upper thread and fit the
bobbin thread properly.
page 20, 23
You have not fitted the spool prop-
erly.
Fit the spool properly. page 23, 27
You have not used the right
combination of fabric, thread and
needle.
Choose a thread and needle that are
appropriate for the type of fabric.
page 29
The needle is bent or blunt. Replace the needle. page 11, 12
If you are sewing thin fabric, the
stitch is too thick.
Sew with stabiliser material under
the fabric.
The thread tension is incorrect.
Adjust the tension of the upper
thread.
page 28
Stitches are
skipped.
You have not threaded the upper
thread properly.
Correct the upper threading. page 23
You have not used the right combi-
nation of fabric, thread and needle.
Choose a thread and needle that are
appropriate for the type of fabric.
page 29
The needle is bent or blunt. Replace the needle. page 11, 12
You have not fitted the needle prop-
erly.
Fit the needle properly. page 12
Dust has accumulated under the
needle plate or in the shuttle.
Remove the needle plate cover and
clean the plate and the shuttle.
page 55
There is a high-
pitched noise
while sewing.
Dust has built up in the feed dogs or
in the shuttle.
Clean the shuttle. page 55
You have not threaded the upper
thread properly.
Correct the upper threading. page 23
The shuttle is scratched.
Replace the shuttle.
Contact your retailer or the nearest
authorized service center.
You have not used bobbin that has
been designed for this machine.
Incorrect bobbins will not work
properly. Only use a bobbin that has
been designed for this machine.
page 18
The needle
threader can not
be used.
You have not moved the needle
holder to its highest position.
Turn the balance wheel toward you
(counterclockwise) to raise the nee-
dle holder to the highest position.
page 24
You have not fitted the needle prop-
erly.
Fit the needle properly. page 12
The stitch is not
sewn correctly.
The presser foot that you are using is
not correct for the type of stitch.
Attach the presser foot that is correct
for the type of stitch that you want to
sew.
The thread tension is incorrect.
Adjust the tension of the upper
thread.
page 28
The thread is tangled, for example,
in the shuttle.
Remove the tangle thread. If the
thread is tangled in the shuttle, clean
the shuttle.
page 55
Symptom Possible cause How to put it right Reference
60


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother XL-2120 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother XL-2120 in the language / languages: English as an attachment in your email.

The manual is 0,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother XL-2120

Brother XL-2120 User Manual - German - 63 pages

Brother XL-2120 User Manual - Dutch - 63 pages

Brother XL-2120 User Manual - French - 63 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info