631328
3
Zoom out
Zoom in
Previous page
1/46
Next page
——————————————————————————————————————————————————————————————
2
FOR USERS IN THE UK, EIRE, MALTA AND CYPRUS ONLY
If this machine is fitted with a three-pin non-rewireable BS plug then please read the following.
IMPORTANT (in the United Kingdom)
Main supply (AC 230/240V, 50Hz)
DO NOT cut off the main plug from the equipment. If the plug
fitted is not suitable for the power outlet in your home or the
cable is too short to reach a power outlet, then obtain an
appropriate safety-approved extension lead or consult your
dealer.
BE SURE to replace the fuse only with an identical approved
type, as originally fitted, and to replace the fuse cover.
If the main plug is cut off, be sure to remove the fuse and
dispose of the plug immediately, to avoid a possible shock
hazard by inadvertent connection to the main power supply.
IMPORTANT (in the other countries)
If the available socket outlet is not suitable for the plug
supplied with this equipment, it should be cut off and an
appropriate three-pin plug should be fitted. With alternative
plugs, an approved fuse must be fitted in the plug.
NOTE: The plug severed from the main leads must be
destroyed as a plug with bared flexible cords is hazardous if
engaged in a live socket outlet. In the event that the plug
fuse is replaced, use a fuse approved by ASTA to BS 1362,
i.e., carrying the mark, rated as marked on the plug.
Always replace the fuse cover. Never use plugs with the
fuse cover omitted.
WARNING: DO NOT CONNECT EITHER
WIRE TO THE EARTH TERMINAL WHICH IS
MARKED WITH THE LETTER ‘E’ OR BY THE
EARTH SYMBOL , OR COLORED GREEN
OR GREEN AND YELLOW.
The wires in this main lead are colored in accordance with
the following code:
Blue Neutral
Brown Live
As the colors of the wiring in the main lead of this
appliance may not correspond with the colored markings
identifying the terminals in your plug, proceed as follows:
The wire that is colored blue must be connected to the
terminal marked with the letter ‘N’ or colored black or
blue.
The wire that is colored brown must be connected to the
terminal marked with the letter ‘L’ or colored red or brown.
CONNECTING PLUGS AND MAIN POWER/SEWING LIGHT SWITCH
1. Connect the three-prong plug into the machine.
2. Connect the electrical supply plug into a wall outlet.
When leaving the machine unattended, the main
power switch of the machine should be switched off
or the plug must be removed from the socket outlet.
The main power/sewing light switch turns the main power
and sewing light on or off.
1 Turn on
2 Turn off
When servicing the machine, removing covers or
changing bulbs, the machine must be unplugged.
1
2
XL5000us.book Page 2 Tuesday, October 28, 2003 11:01 AM
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother RS-20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother RS-20 in the language / languages: English as an attachment in your email.

The manual is 2,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother RS-20

Brother RS-20 User Manual - German - 46 pages

Brother RS-20 User Manual - Dutch - 46 pages

Brother RS-20 User Manual - French - 46 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info