463658
4
Zoom out
Zoom in
Previous page
1/160
Next page
Cover C
Needle and presser foot
section
a Buttonhole lever
Lower the buttonhole lever when sewing buttonholes
and bar tacks.
b Thread guide discs
Pass the thread through the thread guide discs when
using the needle threader to thread the needle.
c Needle bar thread hook
Pass the upper thread through the needle bar thread
hook.
d Needle plate
The needle plate is marked with guides for sewing
straight seams.
e Bobbin cover/Shuttle
Remove the bobbin cover, and then insert the bobbin
into the shuttle.
f Feed dogs
The feed dogs feed the fabric in the sewing direction.
g Presser foot
The presser foot applies pressure consistently on the
fabric as the sewing takes place. Attach the appropriate
presser foot for the selected stitching.
h Presser foot holder
The presser foot is installed onto the presser foot holder.
Right-side/rear view
a Presser foot dial
Use the presser foot dial to adjust the amount of
pressure that the presser foot applies to the fabric.
b Handle
Carry the sewing machine by its handle when
transporting the machine.
c Balance wheel
Turn the balance wheel toward you to raise and lower
the needle to sew one stitch.
d Air vent
The air vent allows the air surrounding the motor to be
exchanged. Do not cover the air vent while the sewing
machine is being used.
e Main power switch
Use the main power switch to turn the sewing machine
on and off.
f Foot controller jack
Insert the plug on the end of the foot controller cable
into the foot controller jack.
g Power supply jack
Insert the plug on the power supply cord into the power
supply jack.
h Feed dog position switch
Use the feed dog position switch to lower the feed dogs.
Memo
z Refer to Cover B, D or E pages while you are
learning to use your machine.
1
2
3
4
5
6
7
8
2
3
5
6
4
7
8
1
F3dash-BrotherE_sgml.book Page C Friday, September 5, 2003 5:46 PM
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother NX-600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother NX-600 in the language / languages: English as an attachment in your email.

The manual is 5,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother NX-600

Brother NX-600 User Manual - German - 158 pages

Brother NX-600 User Manual - Dutch - 158 pages

Brother NX-600 User Manual - French - 158 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info