718836
3
Zoom out
Zoom in
Previous page
1/72
Next page
1
Please read these safety instructions before at-
tempting to use the machine.
DANGER
- To reduce the risk of electric shock:
1Always unplug the machine from the
electrical outlet immediately after using, when
cleaning, when making any user servicing
adjustments mentioned in this manual, or if
you are leaving the machine unattended.
WARNING
- To reduce the risk of burns, fire, electric shock,
or injury to persons.
2Always unplug the machine from the
electrical outlet when making any
adjustments mentioned in the instruction
manual:
To unplug the machine, switch the machine to
the symbol “O” position to turn it off, then
grasp the plug and pull it out of the electrical
outlet. Do not pull on the cord.
Plug the machine directly into the electrical
outlet. Do not use an extension cord.
Always unplug your machine if the power is
cut.
3 Electrical Hazards:
This machine should be connected to an AC
power source within the range indicated on
the rating label. Do not connect it to a DC
power source or inverter. If you are not sure
what kind of power source you have, contact a
qualified electrician.
This machine is approved for use in the
country of purchase only.
4 Never operate this machine if it has a
damaged cord or plug, if it is not working
properly, if it has been dropped or damaged,
or water is spilled on the unit. Return the
machine to the nearest authorized dealer or
service center for examination, repair,
electrical or mechanical adjustment.
While the machine is stored or in use if you
notice anything unusual, such as an odor,
heat, discoloration or deformation, stop using
the machine and immediately unplug the
power cord.
When transporting the machine, be sure to
carry it by its handle. Lifting the machine by
any other part may damage the machine or
result in the machine falling, which could
cause injuries.
When lifting the machine, be careful not to
make any sudden or careless movements,
otherwise you may injure your back or knees.
5 Always keep your work area clear:
Never operate the machine with any air
openings blocked. Keep ventilation openings
of the machine and foot control free from the
build up of lint, dust, and loose cloth.
Do not store objects on the foot controller.
Do not use extension cords. Plug the machine
directly into the electrical outlet.
Never drop or insert any object into any opening.
Do not operate where aerosol (spray) products
are being used or where oxygen is being
administered.
Do not use the machine near a heat source,
such as a stove or iron; otherwise, the machine,
power cord or garment being sewn may ignite,
resulting in fire or an electric shock.
Do not place this machine on an unstable surface,
such as an unsteady or slanted table, otherwise the
machine may fall, resulting in injuries.
6 Special care is required when sewing:
Always pay close attention to the needle. Do
not use bent or damaged needles.
Keep fingers away from all moving parts.
Special care is required around the machine
needle.
Switch the machine to the symbol “O”
position to turn it off when making any
adjustments in the needle area.
Do not use a damaged or incorrect needle
plate, as it could cause the needle to break.
Do not push or pull the fabric when sewing,
and follow careful instruction when freehand
stitching so that you do not deflect the needle
and cause it to break.
IMPORTANT SAFETY
INSTRUCTIONS
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother KE20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother KE20 in the language / languages: English as an attachment in your email.

The manual is 2,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother KE20

Brother KE20 User Manual - German - 72 pages

Brother KE20 User Manual - Dutch - 72 pages

Brother KE20 User Manual - French - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info