718768
48
Zoom out
Zoom in
Previous page
1/52
Next page
Troubleshooting
46
Error messages
When erroneous operations are performed messages and advice on operation will be displayed on the LCD. Follow what is
displayed. If you press or do the operation correctly while the error message is displayed, the message disappears.
Error messages Cause/solution
1
A malfunction occurred. Turn the machine off, then
on again.
This message is displayed if some malfunction occurs.
Turn the machine off, then back on again.
If this message continues to appear, the machine may be malfunctioning.
Please contact your authorized Brother dealer or the nearest Brother
authorized service center.
2
Cannot change the configuration of the characters. This message is displayed when there are too many characters and the
curved character configuration is impossible.
3
Cannot change the font since some letters are not
included to the selected font.
This message appears when the font of the embroidery character pattern is
changed to one that does not include characters used in the pattern.
4
Cannot recognize the data for the selected pattern.
The data may be corrupted. Please turn off the
power and turn on again.
This message appears when you try to retrieve pattern data that is invalid.
Since any of the following may be the cause, check the pattern data.
The pattern data is damaged.
The data that you tried to retrieve was created using another
manufacturer’s data design system.
Turn the machine off, then on again to return it to its normal condition.
5
Check and rethread the upper thread. This message is displayed when the upper thread is broken or not threaded
correctly, and the “Start/Stop” button, etc. is pressed.
6
Data volume is too large for this pattern. This message is displayed when the patterns you are editing take up too
much memory, or if you are editing too many patterns for the memory.
7
Lower the presser foot lever. This message is displayed when a button, such as the “Start/Stop” button,
was pressed while the presser foot was raised.
8
Not enough available memory to save. This message is displayed when the memory is full and the pattern cannot
be saved.
9
Not enough available memory to save the pattern.
Delete another pattern?
This message is displayed when the memory is full and the pattern cannot
be saved.
Press and delete a previously saved embroidery pattern to save the
current one.
Press to return to the original screen without saving.
10
OK to recall and resume previous memory? This message appears if the machine is turned off while embroidering, then
turned on again.
Press to return the machine to the condition (pattern position and
number of stitches) when it was turned off. Follow the procedure described
in “If the thread breaks or the bobbin runs out of thread during embroidering”
on page 28 to align the needle position and embroider the remainder of the
pattern.
11
Pattern extends to the outside of embroidery frame. This message appears when the selected embroidery pattern is larger than
the embroidery frame selected when [Embroidery Frame Identification View]
is set to [ON].
12
Pattern extends to the outside of embroidery frame.
Add no additional characters.
This message is displayed when the character pattern combination is too
large to fit in the embroidery frame. Change the character pattern size or
layout the patterns to fit the embroidery frame. If [Embroidery Frame
Identification View] is set to [ON], setting to [OFF] or selecting larger frame
may help.
13
Pattern extends to the outside of embroidery frame.
This function cannot be used at this time.
This message appears when the embroidery character pattern is resized or
switched between written vertically/horizontally so that it is too large for the
embroidery frame.
14
Preventive maintenance is recommended. Once this message appears, it is recommended to take your machine to an
authorized Brother dealer or nearest Brother authorized service center for a
regular maintenance check. Although this message will disappear and the
machine will continue to function once you press , the message will
display several more times until the appropriate maintenance is performed.
48


Need help? Post your question in this forum.

Forumrules
1

Forum

brother-innov-is-m240ed

Reset search

  • HI!
    Is there the M240ED User Manual in Portuguese??

    Thank you Submitted on 29-8-2023 at 18:42

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother Innov-is M240ED at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother Innov-is M240ED in the language / languages: English as an attachment in your email.

The manual is 2,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother Innov-is M240ED

Brother Innov-is M240ED User Manual - German - 52 pages

Brother Innov-is M240ED User Manual - Dutch - 52 pages

Brother Innov-is M240ED User Manual - French - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info