613414
45
Zoom out
Zoom in
Previous page
1/48
Next page
44
6
The fabric is
wrinkled.
The thread tension is incorrect. Adjust the tension of the upper thread. 26
Stitches are
skipped.
You have not threaded the upper thread
properly.
Correct the upper threading. 16
You have not used the right combination of
fabric, thread and needle.
Choose a thread and needle that are
appropriate for the type of fabric.
21
The needle is bent or blunt. Replace the needle. 7
The needle is incorrectly installed. Correctly install the needle. 7
Dust has accumulated under the needle
plate or in the bobbin case.
Remove the needle plate and clean the
plate and the bobbin case.
40
The needle
threader can
not be used.
The needle has not been raised to the
correct position.
Raise the needle by turning the
handwheel toward you
(counterclockwise) so that the mark on
the wheel points up.
18
You have not inserted the needle properly. Insert the needle properly. 7
The stitch is
not sewn
correctly.
The presser foot that you are using is not
correct for the type of stitch.
Attach the presser foot that is correct
for the type of stitch that you want to
sew.
The thread tension is incorrect. Adjust the tension of the upper thread. 26
The thread is tangled.
Remove the tangled thread. If the
thread is tangled in the bobbin case,
clean the bobbin case.
40
The fabric
does not feed.
The stitch is too fine. Lengthen the stitch length.
The darning plate is fitted on the needle
plate.
Remove the darning plate.
You have not used the right combination of
fabric, thread and needle.
Choose a thread and needle that are
appropriate for the type of fabric.
21
The thread is tangled, for example, in the
race.
Remove the tangle thread. If the thread
is tangled in the race, clean the race.
40
The presser foot you are using is not
appropriate for the type of stitch that you
want to sew.
Attach the presser foot that is correct
for the type of stitch that you want to
sew.
36
Symptom Possible cause How to put it right Page
45


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother GS2520 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother GS2520 in the language / languages: English as an attachment in your email.

The manual is 13,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info