718830
68
Zoom out
Zoom in
Previous page
1/72
Next page
66
APPENDIX
The fabric is
wrinkled.
If thin fabrics are being sewn, the
stitch is too coarse.
Shorten the stitch length, or sew with
stabilizer material under the fabric.
page 24, 28
The presser foot you are using is not
appropriate for the type of stitch that
you want to sew.
Attach the presser foot that is correct
for the type of stitch that you want to
sew.
page 50
The thread tension is incorrect. Adjust the tension of the upper thread. page 26, 59
Stitches are
skipped.
You have not threaded the upper
thread properly.
Correct the upper threading. page 15
You have not used the right
combination of fabric, thread and
needle.
Choose a thread and needle that are
appropriate for the type of fabric.
page 19
The needle is bent or blunt. Replace the needle.
page 20
The needle is incorrectly installed. Correctly install the needle.
Dust has accumulated under the
needle plate or in the race.
Remove the needle plate cover and
clean the plate and the race.
page 57
There is a high-
pitched noise
while sewing.
Dust has built up in the feed dogs or in
the race.
Remove the needle plate cover and
clean the plate and the race.
page 57
You have not threaded the upper
thread properly.
Correct the upper threading. page 15
The bobbin case is scratched.
Replace the bobbin case.
Contact your retailer or the nearest
authorized service center.
You have not used bobbin that has
been designed for this machine.
Incorrect bobbins will not work
properly. Only use a bobbin that has
been designed for this machine.
page 10
The fabric does
not feed.
The feed dogs are lowered.
Slide the feed dog position lever to .
page 35, 41
The stitch is too fine. Lengthen the stitch length. page 25
You have not used the right
combination of fabric, thread and
needle.
Choose a thread and needle that are
appropriate for the type of fabric.
page 19
The thread is tangled, for example, in
the race.
Remove the tangle thread. If the thread
is tangled in the race, clean the race.
page 57, 59
The presser foot you are using is not
appropriate for the type of stitch that
you want to sew.
Attach the presser foot that is correct
for the type of stitch that you want to
sew.
page 50
The needle is bent or blunt. Replace the needle. page 20
Zigzag foot “J” is slanted on a thick
seam at the beginning of stitching.
Use the presser foot locking pin (black
button on the left side) on zigzag foot
“J” to keep the presser foot level while
sewing.
page 27
The fabric feeds
in the opposite
direction.
The feed mechanism is damaged.
Contact your retailer or the nearest
authorized service center.
Symptom Possible cause How to put it right Reference
68


Need help? Post your question in this forum.

Forumrules
1

Forum

brother-fs70wts

Reset search

  • Replacement Bobbin case for brother sewing machine Submitted on 22-9-2021 at 18:45

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother FS70WTs at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother FS70WTs in the language / languages: English as an attachment in your email.

The manual is 2,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother FS70WTs

Brother FS70WTs User Manual - German - 72 pages

Brother FS70WTs User Manual - Dutch - 72 pages

Brother FS70WTs User Manual - French - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info