718892
4
Zoom out
Zoom in
Previous page
1/68
Next page
2
CONGRATULATIONS ON CHOOSING THIS COMPACT
OVERLOCK MACHINE
Your machine is a high quality, easy-to-use product. To fully enjoy all the features, we suggest that you study
this booklet.
If you need more information regarding the use of your machine, your nearest authorized dealer is always
happy to be of service.
Enjoy yourself!
CAUTION
When threading or replacing needle, the main power and light switch of the machine must be switched off or
the plug must be removed from the socket-outlet.
When the machine is not in use, it is recommended that the electric supply plug is disconnected from the
wall socket to avoid any possible hazards.
Notes on the motor
- The maximum operating speed of this sewing machine is 1,000 stitches per minute, which is quite fast
compared to the normal operating speed of 300 to 800 stitches per minute for the ordinary sewing machine.
- The bearings in the motor are made of a special material (oil-impregnated alloy mounted in felt heat-treated
with oil) that enables them to withstand long hours of continuous operation.
- Continuous operation of the sewing machine can cause heat to build in the motor area, but not enough to
adversely affect its performance.
It is important to keep fabric and paper away from the air openings on the back and sides of the machine so
air can get to these openings.
- When the motor is running, sparks can be seen through the air openings in the motor bracket on the side
opposite the handwheel. These sparks are produced by the carbon brushes and the commutator, and are part
of the machines normal operation.
WARNING LABELS
(for complying with UL and CSA requirements)
The following warning labels are on the machine.
Be sure to observe the precautions described in the labels.
Caution (U.S.A. and CANADA only)
1
AVERTISSEMENT:
PA RTIES EN MOUVEMENT. POUR
ÉVITER TOUTE BLESSURE:
FERMER LE CAPOT AVANT DE
COUDRE.
DÉBRANCHER AVANT ENTRETIEN.
2
AVERTISSEMENT:
PA RTIES EN MOUVEMENT. POUR
ÉVITER TOUTE BLESSURE:
FERMER LE CAPOT AVANT DE
COUDRE.
DÉBRANCHER AVANT ENTRETIEN.
Face plate sticker (U.S.A. and CANADA only)
3
Label locations
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother CV-3550 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother CV-3550 in the language / languages: English, Spanish as an attachment in your email.

The manual is 15,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother CV-3550

Brother CV-3550 User Manual - German - 68 pages

Brother CV-3550 User Manual - Dutch, French - 68 pages

Brother CV-3550 User Manual - Italian - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info