684070
22
Zoom out
Zoom in
Previous page
1/24
Next page
22
Error code Description Solution approach
30 Error in push-assist Switch off the system completely and then back on using the LED button(28)
on the battery pack(26). If the problem persists, contact your e-Bike dealer.
40 Over-current detected in motor Reduce the load on the motor by pedaling less or by reducing the assist level.
41 Over-current detected in motor Reduce the load on the motor by pedaling less.
42 Fault in motor turning Switch off the system completely and then back on using the LED button(28)
on the battery pack(26). If the problem persists, contact your e-Bike dealer.
43 Short-circuit in motor Switch off the system completely and then back on using the LED button(28)
on the battery pack(26). If the problem persists, contact your e-Bike dealer.
44 Overheating of motor Reduce the load on the motor by pedaling less or by reducing the assist level.
45 The software has corrected an error du-
ring turning of the motor
Switch off the system completely and then back on using the LED button(28)
on the battery pack(26). If the problem persists, contact your e-Bike dealer.
46 No motor movement detected although
a current of > 2 A was measured
Switch off the system completely and then back on using the LED button(28)
on the battery pack(26). If the problem persists, contact your e-Bike dealer.
60 Interruption of data exchange on the
CAN BUS
Check the cables and plug connections of all components of the e-Bike Sys-
tem.
70 Force applied to pedal not in valid range Switch off the system completely and then back on using the LED button(28)
on the battery pack(26). If the problem persists, contact your e-Bike dealer.
71 Turning of pedals not detected Switch off the system completely and then back on using the LED button(28)
on the battery pack(26). If the problem persists, contact your e-Bike dealer.
72 Force applied to pedal not detected Switch off the system completely and then back on using the LED button(28)
on the battery pack(26). If the problem persists, contact your e-Bike dealer.
73 Fault in link to pedal force sensor Switch off the system completely and then back on using the LED button(28)
on the battery pack(26). If the problem persists, contact your e-Bike dealer.
80 Incorrect motor parameter Switch off the system completely and then back on using the LED button(28)
on the battery pack(26). If the problem persists, contact your e-Bike dealer.
81 An error was detected in the data Switch off the system completely and then back on using the LED button(28)
on the battery pack(26). If the problem persists, contact your e-Bike dealer.
82 The program has been manipulated Switch off the system completely and then back on using the LED button(28)
on the battery pack(26). If the problem persists, contact your e-Bike dealer.
83 Error in program sequence Switch off the system completely and then back on using the LED button(28)
on the battery pack(26). If the problem persists, contact your e-Bike dealer.
84 Incorrect motor parameter Switch off the system completely and then back on using the LED button(28)
on the battery pack(26). If the problem persists, contact your e-Bike dealer.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brose e-Bike at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brose e-Bike in the language / languages: English as an attachment in your email.

The manual is 0,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brose e-Bike

Brose e-Bike User Manual - German - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info