606848
3
Zoom out
Zoom in
Previous page
1/5
Next page
Page 4 Page 5
Installing camera
Mounting Camera and Running Cable
Select the position for the camera and secure the camera mounting bracket. Feed the camera cable
through the bracket and rotate camera housing onto bracket until secure. Adjust camera to the proper
view angle. Make sure the lens is upright relative to the subject by making sure arrow molded into camera
faces up. See “Camera Orientation” Info box. Run cable from camera to DVR location. See Information
box below on “Longer Cable Runs”.
Camera Orientation
It’s important the camera is mount-
ed correctly to ensure the image is
not upside down as the camera lens
can only be positioned one way.
Longer Cable Runs
Longer cable runs may require an upgrade to RG59
Coax cable. First Alert kits ship with economical AV
cable that is designed to work well up to the length of
cable provided, usually around 60 feet. If longer dis-
tances between camera and DVR are required, you will need to upgrade
to RG59 Coax cable. We provide several lengths up to 300 feet. In ad-
dition, if you need to run cable for in-wall installations, then you may
require fire rated cable, FT-4/CMR UL approved for in-wall installations.
safety
caution statements
safety precautions
• Do not drop, puncture, or disassemble the camera.
• Do not tug on the power adapter. Use the plug to remove it from the wall.
• Do not expose the camera to high temperatures.
• For your own safety, avoid using the camera when there is a storm or lightning in your area.
• Use the camera with care. Avoid pressing hard on the camera body.
• Do not crush or damage the power cable
FCC Compliance Class B Digital Device
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications.
However, there is no guarantee that the interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that of the receiver.
• Consult the dealer or an experienced radio or TV technician for help.
Notice: Only peripherals complying with FCC class B limits may be attached to this equipment. Operation
with non-compliant peripherals or peripherals not recommended by First Alert / BRK Brands, Inc. is likely
to result in interference to radio and TV reception. Changes or modications to the product, not expressly
approved by First Alert / BRK Brands, Inc., could void the user’s authority to operate the equipment.
We, First Alert / BRK Brands, Inc. declare under our sole responsibility that the device to which this
declaration relates: Complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
FCC Certification (if applicable)
This device contains a radio transmitter. Accordingly, it has been certied as compliant with 47 CFR Part
15 of the FCC Rules for intentional radiators. Products that contain a radio transmitter are labeled with an
FCC ID.
fcc compliance
Connecting Camera
Video to DVR
Video In
Video to Camera
Power to Camera
Power to DVR
DC 12V Input
Power to Camera
Power
from 120V
12V DC Converter
From DVR
(Not supplied)
AV Cable: BNC/
DC Power
Follow this diagram to connect camera to a DVR or other device using a BNC connection. Note: DVR
Power Adaptor is for illustration purposes only. Your power adaptor may be different.
Option 1
Power from DVR
(Not Supplied)
Option 2
Power from
Supplied Adaptor
Splitter from DVR
Camera & Power
(Not supplied)
Supplied 12V DC Adaptor
product overview
Installation
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO
NOT OPEN CAMERA. NO SERVICABLE PARTS INSIDE. FAILURE
TO DO SO CAN RESULT IN DAMAGE TO THE CAMERA OR ITS
COMPONENTS AS WELL AS INJURY OR DEATH.
The lightning ash with arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of un-insulated
“dangerous voltage” within the product’s enclosure that may be of
sufcient magnitude to constitute a risk of electric shock.
The exclamation point within an equilateral triangle, is intended to
alert the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
CAUTION
RISK OF ELECTRIC SHOCK
fire and electric shock hazard statement
Camera - Ceiling
Mounted
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BRK PRO-CMD520 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BRK PRO-CMD520 in the language / languages: English as an attachment in your email.

The manual is 1,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info