606727
5
Zoom out
Zoom in
Previous page
1/8
Next page
Page 5
Installing camera
Installing Cable-Safe Mounting Bracket
Decide if the camera is to be wall or ceiling mounted and if cable
will be fed through mounting surface hidden directly behind
the bracket or fed through the side of the bracket so cable is
exposed. Mark area where you will drill your hole. The Cable-
Safe Mounting Bracket has three Adjusting Points. 1) Rotates
Bracket 360° relative to mounting surface, 2) Adjusts bracket
hinge 180° and 3) Rotates camera body 360° to level image.
Step 1: Select the position for the camera and drill your hole for
the cable. Feed cable through mounting surface. Mount bracket
to surface.
Step 2: Aim camera at target and using Adjusting Points 1 and 2
in tandem position camera. Tighten Ring and Thumb Screw.
Step 3: Rotate camera body using Adjusting Point 3 to the proper view angle
making sure the Camera Shield is always on top and parallel to the ground so
the image is level in the Live View Screen. See “Camera Orientation” Info box.
Tighten screw.
Step 4: Attach proper length of cable and run from camera to DVR location.
Note: Power cable ends are different. Be sure the correct power connector end
matches “To Camera” or “To DVR”. Tip - Connect cable at camera end before
running cable to verify orientation is correct. Also, see Information box on
“Longer Cable Runs”.
Step 5: Check camera orientation via the Live View screen. Adjust as required.
Connecting Camera
Video to DVR
Video In
Video to Camera
Power to Camera
Power to DVR
DC 12V Input
Power to Camera
Power
from 120V
12V DC Converter
From DVR
AV Cable: BNC/
DC Power
Follow this diagram to connect camera to a DVR or other device using a BNC connection. Note: DVR
Power Adaptor is for illustration purposes only. Your power adaptor may be different.
Option 1
Power from DVR
(Not Supplied)
Option 2
Power from
Supplied Adaptor
Splitter from DVR
Camera & Power
Supplied 12V DC Adaptor
product overview
Installation
Adjusting Points
1
3
2
Screw
Thumb Screw Ring
Slot for exposed
cable installation
To DVR To Camera
Verify Cable Orientation
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BRK PRO-CM600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BRK PRO-CM600 in the language / languages: English as an attachment in your email.

The manual is 1,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info